Power Over Ethernet Powered Device - Planet GSD-808HP User Manual

3.4 Power over Ethernet Powered Device

3~5 Watts
6~12 Watts
10~12 Watts
3~12 Watts
30 Watts
Since the GSD-808HP per PoE port supports 52V DC PoE power
output, please check and assure the Powered Device (PD) accept-
able DC power range is from 52V DC. Otherwise, it will damage the
Note
Powered Device (PD).
16
Voice over IP phones
Enterprise can install POE VoIP Phone, ATA and other
Ethernet/non-Ethernet end-devices to the central where
UPS is installed for un-interrupt power system and power
control system.
Wireless LAN Access Points
Museum, Sightseeing, Airport, Hotel, Campus, Factory,
Warehouse can install the Access Point any where with no
hesitation.
IP Surveillance
Enterprise, Museum, Campus, Hospital, Bank, can install IP
Camera without limits of install location – no need electri-
cian to install AC sockets.
PoE Splitter
PoE Splitter split the PoE 48V DC over the Ethernet cable
into 5/12V DC power output. It frees the device deploy-
ment from restrictions due to power outlet locations, which
eliminate the costs for additional AC wiring and reduces
the installation time.
High Power Speed Dome
This state-of-the-art design is considerable to fit in various
network environments like traffic centers, shopping malls,
railway stations, warehouses, airports, and production facil-
ities for the most demanding outdoor surveillance applica-
tions- no need electrician to install AC sockets.