Adjusting The Position Of The Gearchange Pedal - Ducati MONSTER S4R S Use And Maintenance Manual

Adjusting the position of the gearchange
pedal
(fig. 16)
The gear change pedal position relative to the footrest
may be adjusted to suit rider preferences.
To adjust the position, proceed as follows:
Apply a wrench to the flats (2) to hold the tie-rod (1) and
loosen the lock nuts (3) and (4).
Notes
The locknut (3) has a left-hand thread.
Turn the rod (1) to move the gearchange pedal to the
required position.
Tighten the two lock nuts onto the tie-rod.
3
1
2
E
4
fig. 16
25