Seat And Helmet Holder Lock - Ducati MONSTER S4R S Use And Maintenance Manual

Seat and helmet holder lock

Opening
Insert the key in the lock and turn it clockwise to release the
seat from the frame. Pull the seat backwards to release it
from the front catches.
The helmet cable (1) is located at the rear of the
compartment under the seat (see page 47). Pass the
cable through the helmet and insert the end of the cable in
the pin (2). Leave the helmet hanging and refit the seat to
hold it in place.
Warning
This device protects the helmet against theft when the
motorcycle is parked. Do not leave the helmet attached in
this way when riding the motorcycle, as it can interfere with
your movements and cause loss of control of the motorcycle.
Closing
Make sure all parts are correctly arranged and secured in
the underseat compartment. Insert the front ends of the
seat base under the U bolt in the frame, then push the
rear end of the seat until you hear the bolt in the lock click
into place. Check that the seat is firmly secured to the
frame and remove the key from the lock.
(fig. 20 and fig. 21)
0
1
1
2
E
fig. 20
fig. 21
29