Ducati SUPERBIKE 1098 R BAYLISS Owner's Manual page 35

DTC (Ducati Traction Control) setting function
This function serves to set the sensitivity level for the DTC
E
(Ducati Traction Control).
To set the Traction Control sensitivity level, with the
motorcycle stationary, enter the "Setup DTC" menu page.
This page only appears in the menu once the Traction
Control ECU has been activated (DTC ON).
The Traction Control sensitivity level setting will be
indicated on the right-hand side of the display (L.1.......L.8);
the levels range from "1" to "8"; the higher the number,
the greater the sensitivity of the Traction Control system
(see following paragraph).
Within this menu page, press switch (1, fig. 10) in position B
"▼" for 3 seconds to access the level setting function.
page 1: the display will show "Setup LEV. 1".
If you wish to set this level, press switch (1, fig. 10) in
position B "▼" for 3 seconds; the instrument panel will
automatically quit this page and return to the initial display,
with the level setting indicated on the right-hand side.
If instead you wish to set the next highest level, press
switch (1, fig. 10) in position B "▼".
34
Only if
active
B = On for 3 secs.
A
B
B
B
B = ON
for 3 secs.
A
B = ON
for 3 secs.
A
B = ON
for 3 secs.
fig. 27