Erase DDA
This function enables you to delete the data saved on the
DDA: the DDA must be connected to the motorcycle wiring.
To delete the data, enter the menu and select the
"Erase DDA" page.
If you press the switch (1, fig. 10) in position B "▼" for
3 seconds and the DDA is not acquiring data, the message
"WAIT..." appears on the display for 10 seconds. After
10 seconds, the message "ERASE OK" appears for
2 seconds, to confirm that the data has been deleted.
If you press the switch (1, fig. 10) in position B "▼" for
3 seconds and the DDA is acquiring data, the DDA
memory is not cleared and the display shows the
message "FAIL" for 2 seconds.
B = On for 3 secs.
YES
DDA = ON
Displayed for 2 secs.
NO
Displayed for 10 secs.
Displayed for 2 secs.
E
fig. 25
31