Ducati SUPERBIKE 1098 R BAYLISS Owner's Manual page 34

Activation of the system
To activate the system, the motorcycle must be stationary
and safely parked.
To enable Traction Control, enter the menu and set "DTC"
to "On" by pressing switch (1, fig. 10) in position B "▼" for
3 seconds; once the 3 seconds have elapsed, the message
"DTC" will appear on the display to indicate activation of
the Ducati Traction Control system. When activated, the
message "DTC" is visible both on the normal display and
also within the menu pages.
Notes
The functions of the system
To operate the system, the motorcycle must be stationary
and safely parked.
Each time DTC is activated, the Traction Control ECU will
set the sensitivity level to 8; the level may then be
adjusted using the function "Traction Control Sensitivity
Level Setting (DTC SETUP)".
To disable Traction Control, enter the menu and set "DTC"
to "OFF" by pressing again switch (1, fig. 10) in position B
"▼" for 3 seconds; once the 3 seconds have elapsed, the
message "DTC" will disappear from the display, thereby
indicating deactivation of the Ducati Traction Control system.
If the engine is suddenly switched off (Key-Off) while
Traction Control is activated, the function will not be disabled
but will still be active (DTC On) at the next Key-ON.
If, however, battery power is suddenly cut off (Batt-OFF),
when battery power is restored and the engine is next
switched on (Key-On), the Traction Control will no longer
be activated (DTC OFF).
Regular maintenance
To ensure that system continues to function correctly it is
necessary to observe the manufacturer's programmed
maintenance schedule.
Reasonable errors made by the rider with the DTC system
activated.
E
33