Ducati SUPERBIKE 1098 R BAYLISS Owner's Manual page 31

DDA data acquistion
This function serves to activate the DDA (Ducati Data
E
Analyzer)(see page 80): the DDA must be connected to
the motorcycle wiring.
To activate the DDA, go into the menu and set the "DDA"
to "On" by pressing switch (1, fig. 10) in position B "▼" for
3 seconds.
START and STOP the lap separator by pressing the high
beam FLASH button (13, fig. 6) on the left-hand handlebar
switch.
If the DDA function is active and the instrument panel
is suddenly switched off (Key-Off), the function is
automatically disabled.
fig. 24
30