Seat Catch And Helmet Pin - Ducati MONSTER 400 Owner's Manual

Seat catch and helmet pin

Opening
Fit the ignition key into the lock. Turn the key clockwise
to detach seat from frame. Pull the seat backwards to
slide it off its front holders.
On the rear end of the compartment underneath the
seat, there is the helmet fastening cable (1) (see page
31). Insert the cable into the helmet, slide the end of the
cable onto the pin (2). Leave helmet hanging outside and
E
refit the seat.
Warning
This system is intended to lock your helmet safely
when you park your motorcycle. Never leave the helmet
hanging outside when riding or it may get in the way and
make you lose control of the motorcycle.
Closing
Make sure that all parts are arranged and secured
properly inside the compartment under the seat. Slide
the front ends of the seat bottom underneath the frame
U-tube and push down on the rear end of the seat until
you hear the catch click. Make sure the seat is firmly
secured to the frame and take the key out of the lock.
20
0
1
fig. 14.1
fig. 14.2