Table of Contents
Advertisement
6.1. Network Configuration
6.1.1 Network
This section provides the menu of connecting the device through Ethernet cable.
MAC address
Obtain an IP
address
automatically
(DHCP)
IP Address
Configuration & Operation
Display the Ethernet MAC address of the device. Note that user cannot
change it.
Enable this checked box when a DHCP server is installed on the
network to issue IP address assignment. With this setting, the IP
address is assigned automatically. If this device cannot get an IP
address within limited tries, the device will assign a default IP address
for 192.168.0.20.
If you do not select "Obtain an IP address automatically", then you
need to enter these network parameters by yourself.
This address is a unique numbers that identifies a computer or device
on the WAN or LAN. These numbers are usually shown in groups
35
User's Manual of IVS-H125 Series
Chapter 6.
Advertisement
Table of Contents
