Assembly - ProForm 762 Ekg Bike User Manual

ASSEMBLY

Assembly requires two persons. Place all parts of the crosstrainer in a cleared area and remove the packing
materials. Do not dispose of the packing materials until assembly is completed. In addition to the included hex
keys, assembly requires a phillips screwdriver
rubber mallet
As you assemble the crosstrainer, use the drawings below to identify small parts. The number in parentheses
below each drawing is the key number of the part, from the PART LIST on page 22. The number following the
parentheses is the quantity needed for assembly. Note: Some small parts may have been preassembled for
shipping. If a part is not in the parts bag, check to see if it has been preassembled.
M6 Flat M10 Zinc Split
Washer (71)–3 Washer (85)–2
M4 x 16mm
Screw (73)–1
M10 x 27mm Button
Screw (76)–3
1/2" Nylon
Locknut (52)–1
(not included).
M10 Black Split
Washer (77)–3
M6 x 16mm
Screw (87)–5
M10 x 45mm Button
Screw (74)–2
, an adjustable spanner
M10 Black Nylon
Locknut (63)–2
M6 x 50mm Screw
(69)–3
M10 x 52mm Button Bolt (68)–2
M10 x 112mm Carriage Bolt (65)–2
1/2" x 70mm Button Bolt
(51)–1
4
, and a
M10 Zinc Nylon
Locknut (66)–2
M6 x 25.4mm Button
Screw (79)–1