Table of Contents
Advertisement
ASSEMBLY
To hire an authorized service technician to assemble the elliptical, call 1-800-445-2480.
Assembly requires two persons. Place all parts of the elliptical in a cleared area and remove the packing
materials. Do not dispose of the packing materials until assembly is completed.
In addition to the included tool(s), assembly requires a Phillips screwdriver
, two adjustable
wrenches
, and a rubber mallet
.
See the drawings below to identify the small parts needed for assembly. The number in parentheses below each
drawing is the key number of the part, from the PART LIST near the end of this manual. The number following
the key number is the quantity needed for assembly. Note: If a part is not in the hardware kit, check to see if
it has been preassembled. To avoid damaging parts, do not use power tools for assembly.
M8 Split
Wave Washer
M6 Split Washer
(95)–2
M8 x 25mm
M10 x 25mm
(111)–12
Washer (83)–11
Washer (98)–6
Washer (36)–2
#10 x 12.7mm
M4 x 16mm
M8 x 19mm Patch
M8 Locknut
Screw (59)–12
Screw (104)–10
Screw (82)–15
(102)–4
M8 x 38mm
M8 x 56mm Patch
Bolt (96)–4
Screw (94)–2
M8 x 80mm Patch
M10 x 20mm Patch
Screw (84)–2
Screw (66)–2
5
Advertisement
Table of Contents
