Pro-Form 730 Zlt Treadmill Manual page 10
Uk manual
Hide thumbs
Also See for 730 Zlt Treadmill:
- Gebruikershandleiding (32 pages) ,
- Manuel de l'utilisateur (32 pages) ,
- Bedienungsanleitung (32 pages)
Table of Contents
Advertisement
7. Attach the Right Handrail (72) to the Right
Upright (76) with two 3/8" x 3 1/2" Screws (9)
and two 3/8" Star Washers (5). Start both
Screws, but do not tighten them yet.
8. Insert the Console Frame (87) into the Handrails
(71, 72). Attach the Console Frame with four 1/4"
x 1" Screws (10). Start all four Screws, and
then tighten them. Be careful not to pinch the
Upright Wire (not shown).
Firmly tighten the four 3/8" x 3 1/2" Screws (9).
7
8
87
9
10
71
10
9
5
72
76
9
10
72
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the 730 Zlt Treadmill and is the answer not in the manual?
Questions and answers
When the device is turned on, it starts in tilt mode (incline) and does not stop when you press any button.
The Pro-Form 730 Zlt Treadmill may start in tilt mode and not respond to button presses because the incline system needs to be recalibrated. To recalibrate, hold down the Stop and Speed increase buttons, insert the key into the console, then release the buttons. Press the Priority Display button, then press the Incline increase or decrease button. The treadmill should move to the maximum incline and then return to minimum. If it does not start, press Stop and try again.
This answer is automatically generated