Installing The Converter - Planet GTP-802 User Manual

6. Installing the Converter

Please follow these steps to install the PoE+ Media converter:
Turn off the power of the device / station in a network to
l
which the GTP-80X will be attached.
Ensure that there is no activity in the network.
l
Attach fiber cable from the GTP-80X to the fiber network.
l
Attach a Cat.5 / 5e / 6 UTP cable from the 10/100/1000Base-T
l
network to the RJ-45 port on the GTP-80X.
Connect the 52V~56V DC power adapter to the GTP-80X and
l
verify that the Power LED lights up.
Turn on the power of the device / station, the TX Link and FX
l
Link LEDs should light when all cables are attached.
1000Base-SX/LX
SC Fiber
Figure 6-1: GTP-802 / GTP-802S Installation
14
10/100/1000Base-T UTP