Selecting Stations Automatically; Selecting Stations Manually; Selecting The Station Search Sensitivity; Switching From Stereo To Mono (Fm) - Blaupunkt LONDON RDM 104 Operating Instructions Manual

Selecting stations automatically

Switching to the following station
• Press the rocker switch
The car radio will automatically tune
into the following station.
Switching to the preceding station
• Press the rocker switch
The car radio will automatically tune
into the preceding station.
If you hold the rocker switch
the car radio will move through the stations
quickly either up or down.
up
step by step
down
down

Selecting stations manually

You can also select stations manually.
Important: Switch off AF first.
• Press the rocker switch << or >>.
The frequency will change in preset incre-
ments downward or upward.
If you hold the rocker switch pressed down,
then the frequencies will change quickly.
When you have reached the frequency you
.
want
• then release the rocker switch <</>>.
Selecting the station search
.
sensitivity
You can alter the sensitivity of the automatic
/ down, then
station search feature in all frequency ran-
ges. If you only want to tune into stations with
strong signals (low sensitivity):
• Press the lo/CLR button repeatedly
until lo appears in the display.
If you also want to tune into stations with
weaker signals (high sensitivity):
step by step
• Then press the lo/CLR button again so
up
that lo disappears from the display.
You can also alter the degree of sensitivity in
every stage (see the section on Pro-
gramming with DSC - S-DC, S-LO).
Switching from stereo to mono
(FM)
If you want to switch between stereo and
mono playback:
• Press the lo/CLR button for longer than
2 seconds.
The stereo symbol will light up in the
display for stereo playback.
When you switch the radio on, stereo play-
back is activated.
The radio will automatically switch to mono
playback under poor reception conditions.
Switching between the memory
levels (FM)
You can switch between the memory levels I,
II and T to store and to retrieve stored stati-
ons.
The currently selected memory level will ap-
pear in the display.
• Press the FM button repeatedly until
T
the memory level you want appears in
the display.

Storing stations

You can store different values for this setting
separately on KeyCard 1 and 2.
In the FM range, you can store six stations on
the station buttons 1 to 6 for each of the
memory levels (I, II, T). In the AM and LW
range, you can store six stations each.
• Select the frequency range with the
FM or M•L button.
T
35