Cd Playback; Inserting A Cd; Removing A Cd; Selecting A Track - Blaupunkt LONDON RDM 104 Operating Instructions Manual

CD playback

Inserting a CD

• Switch the radio on.
• Insert a CD with the label facing up
completely into the disk insert with the
use of force.
The CD will be transported to its playing
position automatically.
CD ON and the track number T1 will appear
in the display. The display will change and
now the playing time or CD PLAY or the
name you have given the CD selected will
appear.

Removing a CD

• Press the button (eject) for longer
than one second.
The CD will be ejected.
Do not disturb or try to help the automatic
insert and eject of the CDs in any way.

Selecting a track

During playback you can press the rocker
switch / in order to select a different
track.
If you would like to play one of the following
tracks
• press the rocker switch
If you would like to listen to the track currently
playing again from the beginning,
• then press the rocker switch
If you would like to play one of the preceding
tracks
• press the rocker switch
required.

Fast forward and fast rewind

To fast forward
• hold the rocker switch >> pressed
down.
To fast rewind
• hold the rocker switch << pressed
down.
Once you have reached the desired position,
release the button and playback will start
again.

TPM (Track Program Memory)

With TPM you can choose up to 20 tracks
each from up to 30 CDs and store them.
When TPM is activated (TPM will light up in
the display), then the selected tracks will be
played on the CD which has been inserted.
If a CD is inserted from which no tracks have
been stored in TPM, then NO-TPM will ap-
pear briefly in the display. All of the tracks on
.
this CD will be played.

Storing tracks with TPM

once.
• Insert a CD.
• Select a track with the rocker switch
as often as / .
In order to store this track
• press the TPM button until you hear a
beep or until the audio mute switches
off again.
Select the next track with the rocker switch
/ and store it with the TPM button as
described above.
You can store tracks at any time during CD
playback. In order to do this, TPM must be
switched off (press the TPM button). Pro-
gram TPM for other CDs in the same way.

CD playback with TPM

• Insert a CD.
• Press the TPM button.
The tracks stored with TPM will be played in
ascending order. Any tracks which were not
stored will be skipped over.
41