(only San Remo RD 127) ...... 22 Storing stations (WIEN RD 127) ... 26 (source) ..........29 Detaching the face ......23 Storing stations (SAN REMO RD 127) . 26 The Loudness function ......29 Attaching the face ......23 Automatically storing the strongest Overview of factory default settings ..
Quick reference 1 On/Off To alter a setting: Manual seek tuning: Turn button. Briefly press AUD repeatedly until the “m” lights up in the display - “AF” does abbreviation of the desired mode and not light up in the display. the adjusted value appear in the dis- Use the buttons to change the...
Page 5
WIEN RD 127: tions automatically. You can store six stations on each FM To recall a station stored with 7 M•L (only SAN REMO RD 127) memory bank (I, II and “T”). Travelstore: SAN REMO RD 127: Toggle switch for medium- (MW) and Press FM until “T”...
Page 6
: AF ; Display < RELEASE (only SAN REMO RD 127) (Alternative Frequency during RDS The face of this unit can be detached Radio operation operation) for extra anti-theft protection. You When “AF” lights up in the display, the should take the detachable face with radio will automatically search for a you when leaving your car.
Use only the accessory and replacement disconnection of the car battery), the set will As the driver of a motor vehicle, it is your parts approved by Blaupunkt. be electronically blocked. In such a case it responsibility to pay attention to the traffic can only be made operable again by entering situation at all times.
Turn off the radio. Detachable face play shows “2521”. • Press preset buttons 1 and 4 simulta- (only San Remo RD 127) • To confirm the code number: neously and hold down while switching Press the rocker switch This unit is equipped with a detachable face.
Detaching the face Switching the code-LED on and off (only WIEN RD 127) • Press RELEASE. To indicate that your unit is equipped with The unit will be switched off automatically. security coding, the LED (the ring around The control panel will be released in order for knob 1) can be switched to flash for extra you to remove it.
Selecting a waveband gramme in Lower Saxony, Germany). • Tune into another station. (only SAN REMO RD 127) When RDS is activated, the preset buttons become programme buttons. You now know REG - regional programme You can select between the following wave-...
Station tuning , or backwards using the button, e.g. Separate adjustment of the seek tuning NDR 1, 2, 3, 4, N-JOY, FFN, ANTENNE ... sensitivity for local and distant recep- Automatic tuning For this it is necessary that the stations have tion Condition: AF must be switched on! been tuned in at least once and that “AF”...
You can automatically store the six (Wien RD by pressing FM or M•L. On FM, select matically or manually). 127) or five (San Remo RD 127) most pow- the memory bank with FM . Press FM • Press and hold down the desired preset...
Receiving traffic programme stations with RDS-EON • Press the corresponding preset button The abbreviation “EON” stands for En- Traffic announcement priority briefly to recall the station. hanced Other Networks, meaning the ex- on/off change of information within a radio network. If the priority for traffic announcement pro- Many FM broadcasters offer traffic messag- Switching from stereo to mono...
CD operation Switching off the beep tone Adjusting the volume for traffic Inserting a CD announcements and the beep a) Tune into another station offering traffic • Switch on the radio. tone information: • Insert a CD with the label facing up •...
Beside the letter “T” (standing for “Track”), The Loudness function Overview of factory default the track number of the currently selected settings When listening at a low level, the human ear title will appear in the display. is less sensitive to the bass frequencies than LOUDNESS to the treble frequency range.
(only for Germany) If you would like to know the address of 0.9 µV at 26 dB the next Blaupunkt service centre of your Sensitivity: area without having our service list at signal-to-noise ratio hand: Frequency range: 30 - 16 000 Hz (-3dB) Find out your area code.