Mix Playback; Entering Cd Names; Switching Sound Sources With Src; Connecting A Telephone - Blaupunkt LONDON RDM 104 Operating Instructions Manual

MIX playback

When the function MIX has been activated,
then the tracks on a CD will be played in
random order. MIX will then appear in the
display.
If TPM has been activated, then only those
tracks stored in TPM will be played. If you do
not want to listen to any one track, then just
press the rocker switch
different one.
In order to switch the MIX function on or off,
• press PS/MIX briefly.

Entering CD names

You can give up to 30 CDs names. When you
then insert a named CD, its name will appear
in the display.
• Insert a CD.
• Press the DSC button.
• Use the rocker switch
mode in order to select the function CD
DISP.
• Select the function NAME with the rok-
ker switch <</>>.
• Then use the rocker switch
select the DSC mode CD NAME and
• press the rocker switch <</>>.
8 dashes will then appear in the display. The
first dash will flash.
• Select the first character with the help
of the rocker switch
You have the choice between the capital
letters A to Z, special characters and the
digits 0 to 9.
The first character selected will flash.
In order to confirm your selection
/ to select a
• press the rocker switch >>.
The first character will light up and the se-
cond dash will flash.
Enter the next character in the same way.
Once you have completed the name as desi-
red,
• press the -dB button in order to store it
and then press the DSC button to quit
the NAME mode.
You can change any existing name by en-
tering and storing a new one (overwriting).
If you have chosen NAME, but have not
/ in DSC
entered one then CD PLAY will appear in the
display.
/ to
Switching sound sources with
SRC
You can switch between the different sound
/ .
sources in the sequence CD - radio - CD.
If you want to switch the sound source while
you are listening to a CD,
• press the SCR button.
The equipment will switch over to radio re-
ception.
If you have connected a CD changer (option)
to the system, then you can switch between
CD - radio - CD changer - CD.

Connecting a telephone

If your vehicle is equipped with a car telepho-
ne, then the radio or CD playback can be
automatically switched to mute while you are
using the telephone.
TELEPHONE will then appear in the display.
The telephone must be connected to the
audio equipment for this to function properly.
Please refer to the installation instructions for
further information.
43