Naming Cds In The Magazine; Appendix; Technical Data - Blaupunkt LONDON RDM 104 Operating Instructions Manual

Deleting TPM for all of the CDs in the
magazine
• Press the lo/CLR button repeatedly
until CLR MAG appears in the display.
When the memory information for the entire
CD has been deleted, then READY will ap-
pear in the display.
TPM Update for the magazine
In order to update the TPM information, leave
all of the CDs in the magazine for which you
do not want to delete the information.
Remove all of the other CDs from the maga-
zine.
• Select CD UPD in the DSC mode.
• Insert the magazine into the changer.
• Press the -dB button.
During the update, LOAD CD 1 ... LOAD CD
10 will appear in the display.
When the update for this magazine has been
completed, then NEXT MAG will appear in
the display.
Insert the next magazine into the changer.
To end the update
• press the TPM button repeatedly until
READY appears in the display and
then press the DSC button.
48

Naming CDs in the magazine

You can give each of the CDs in the magazi-
ne a name which will then appear in the
display during playback (CD DISP NAME).
You can name a total of 99 CDs.
• Select the menu CDC NAME in the
DSC mode.
• Then press the -dB button.
Dashes will appear in the display.
The first dash will flash.
• Use the rocker switch
the first letter, special character or digit
from 0 to 9.
In order to confirm your selection
• press the rocker switch >>.
Enter the next characters in the same way.
In order to store the name
• press the -dB button.
In order to quit the DSC mode
• press the DSC button.

Appendix

Technical data

Amplifier:
Output
performance:
FM:
Sensitivity:
/ to enter
Frequency
range:
CD:
Frequency
range:
We reserve the right to make changes!
4 x 20 watts RMS ac-
cording to DIN 45324
4 x 25 watts music acc.
to DIN 45324
0.9 µV at 26 dB
S/N ratio
30 to 16 000 Hz (- 3 dB)
20 to 20 000 Hz (-1 dB)