Which Equalizer Setting Is The Correct One - Blaupunkt MEMPHIS MP66 Operating And Installation Manual

The current centre frequency
(Hz) is highlighted.
2000Hz -8dB
➔
Select the centre frequency to
be changed by pressing on
on the rocker switch
In the two frequency bands "EQ
Low 1" and "2", you can select
one centre frequency each from
20 to 250 Hz.
In the four frequency bands
"EQ High 1" to "4", you can se-
lect one centre frequency each
from 320 to 20,000 Hz.
➔
On the rocker switch
press .
The level display (dB) is high-
lighted.
➔
Select the level of the previ-
ously set centre frequency by
pressing on
3
er switch .
The level change is displayed
in the frequency spectrum. The
sound changes accordingly.
➔
On the rocker switch
press .
The quality factor Q is high-
lighted.
Changing basic settings in the settings menu
EQ 1
Q 1 High 4
or
3
.
3
,
or on the rock-
3
,
➔
Select the desired quality fac-
tor Q by pressing on
the rocker switch
•
"Q1": Low edge steepness,
wide fi lter bandwidth
•
"Q2": Medium edge steep-
ness and fi lter bandwidth
•
"Q3": High edge steepness,
narrow fi lter bandwidth
The change is displayed in
the frequency spectrum. The
sound changes accordingly.
➔
Press the OK button
Your user-defi ned equalizer set-
ting is saved.
Which equalizer setting is the
correct one?
Sound impres-
sion or problem
Unclean bass,
droning, unpleas-
ant pressure
Very transparent,
aggressive sound,
no stereo effect
Muffl ed sound,
low transparency,
instruments do
not excel
Insuffi cient bass
or on
3
.
A
.
Measure
Centre Level (dB)
frequen-
cy (Hz)
125–400 approx. –4
1000– approx.
2500 –4 to –6
8000– approx.
12500 +4 to +6
50–100 approx.
+4 to +6
109