Setting The Equalizer; Turn On/Off Message Edit - Blaupunkt MELBOURNE C34 Manual

Setting the equalizer

You can select an equalizer curve for 3 music types (Rock,
Pop, Classic).
You can store and adjust the equalizer settings for fre-
quency and level.
Selecting the equalizer curve
1.
MENU
Press the for more than 2 seconds to enter
the audio adjustment mode.
2.
Press the or or rotate the VOL dial to
select the desired equalizer curve as follows.
Display indication
ROCK
POP
CLASSIC
USER 1
USER 2
EQ OFF
Adjusting the equalizer curve
1.
Adjust the desired sound characteristics.(See page
3 "Adjusting the Sound Characteristics")
2.
Press and hold the (USER 1) or
2) for more than 2 seconds to store the equalizer
curve, while displaying "BAS/TRE" in the display win-
dow.
Cancelling the equalizer curve
1.
Press the MENU for more than 2 seconds to enter
the audio adjustment mode.
2.
Press the SRC to cancel the equalizer curve.
The "EQ OFF" will blinking for few seconds.

Turn on/off message edit

You can edit the turn on/off message and store it in memory.
Following four messages can be edit with 9 characters each.
Turn-on message
• HELLO (MESG 1) / WELCOME (MESG 2)
Turn-off message
• SEE YOU (MESG 3) / GOOD-BYE (MESG 4)
1.
Press the MENU , then press the
play the "MESG ON" on the display window.
2.
Press the or
SRC PWR
3.
Rotate the VOL dial to select the desired message you
want to edit.
HELLO WELCOME
4.
Press the SRC or PWR
A. Rotate the VOL dial in a clockwise direction to select
the desired characters.
( A B C . . . Z
0 1 2 3...9 " "Space )
B. Press the or
sor.
C. Repeat steps A. and B. to complete entering the en-
tire message 9 characters max.
5.
Press the or PWR
SRC
(USER
The new message flashes and automatically returns to
previous indication.
Tips
• To erase /correct a message, press the
2 seconds to clear the character and re-enter.
• If you make no button input or dial operation in 30 seconds,
the message edit mode will turn off automatically.
• Make sure the "MESG" will be "ON" .
• When entering a name, pressing the following buttons af-
fects the display of characters as follows.
: Changes to inputting letters. (Starts with " A ".)
: Changes to inputting numbers. (Starts with "
: Changes to inputting characters. (Starts with "
: Enters a space (blank).
Erasing the turn on/off message
You can erase the turn on/off message if so desired.
1.
2.
3.
or to dis-
4.
to flash the "HELLO".
SEE YOU GOOD- BYE
, then enter the character.
< > ∗ + − . /
'
to move the flashing cur-
to store the message.
for more than
MENU
0
".)
<
".)
Press the , then press the
MENU
play the "MESG ON" on the display window.
Press the or , then rotate the VOL dial to se-
SRC PWR
lect the desired message you want to erase.
Press the SRC or , then press the
PWR
than 2 seconds.
To return to the previous indication, Press
Repeat steps 2. and 3. if you want to erase other mes-
sage.
or to dis-
for more
MENU
.
MENU
E-5