➔
Press the softkey
"Turn On Text").
•
: The welcome text is
shown after switch-on.
•
: The welcome text is not
shown.
To change the welcome text, see
"Changing the welcome text (Turn
On Text)" on page 120.
Changing images and animations
( SD Browser/ USB Browser)
You can replace the following fac-
tory installed images and anima-
tions with your own:
•
the wallpaper which appears
when "AUX" is selected as au-
dio source (the image is set to
a connector at the factory),
•
the screen saver,
•
the wallpaper which appears
if the radio is switched off and
the vehicle ignition is switched
on, and also the "Off Clock"
menu item in the "Clock Set-
tings" menu as described on
page 117. The image is set to
an analogue clock at the fac-
tory.
For your images and animations
to be displayed, they must be cre-
ated using the BMP fi le format.
For the images to be displayed
without distortion, they should
ideally have 270 x 96 pixels.
Changing basic settings in the settings menu
9
(next to
Animations consist of
max. 20 BMP fi les that are auto-
matically displayed in succession
just like single frames of a mov-
ie. All BMP fi les of an animation
must be stored in a separate fold-
er. No other fi les may be stored in
this folder!
The images must be available as
a fi le on an MMC/SD card or USB
medium. The MMC/SD card must
be inserted or the USB medium
must be connected.
➔
Press the softkey
"SD Browser") if the images
are available on an MMC/SD
card.
Press the softkey
"USB Browser") if the imag-
es are available on a USB me-
dium.
The fi le browser opens.
You can select a BMP fi le or a
folder from the list as follows:
➔
On the rocker switch
press
or
to scroll up or
down.
➔
On the rocker switch
press
to change up to a
higher-level folder.
➔
On the rocker switch
press
to change down to a
subfolder.
➔
Press the OK button
select the selected fi le or the
<
(next to
;
(next to
3
,
3
,
3
,
A
to
113