5.3 Internet Setup
5.3.1 WISP
The page includes the following fields:
Object
WISP Status
SSID
Authentication Type
Figure 5-7 WISP
You can choose "enable" or "disable" to enable or disable the
"WISP". The Wireless ISP (WISP) mode allows that the wireless
interface is treated as WAN port, and the Ethernet port is LAN port.
User must configure wireless encryption connection and set the
Radio Mode to "Client".
You can manually enter the SSID of the Wireless AP that you want
to connect, or click "AP Scan" to site survey a AP.
Select the correct Authentication Type that should be the same as
the Wireless AP that you want to connect to.
- 33 -
User's Manual of WNAP-6306
Description