Table of Contents
Advertisement
5.
Select TCP/IP in Microsoft of Select Network Protocol dialog box then click OK button to
install the TCP/IP protocol, it may need the Microsoft Windows CD to complete the installation.
Close and go back to Network dialog box after the TCP/IP installation.
6.
Select TCP/IP and click the properties button on the Network dialog box.
7.
Select Specify an IP address and type in values as following example.
IP Address: 192.168.1.2, any IP address within
connect the Wireless LAN Access Point.
IP Subnet Mask:
Figure 4-2
255.255.255.0
User's Manual of WNAP-6306
192.168.1.2
to
192.168.1.254
- 25 -
is good to
Advertisement
Table of Contents
