Table of Contents
Advertisement
2.3 Port & Connector
Interface
N-Type Connector
LAN
Reset
Please physically attach antenna before power on.
Figure 2-2 Port and Connector of WNAP-6306
For external antenna. You can use the N-Type connector to connect
with 2.4GHz external antenna.
The RJ-45 sockets allow LAN connection through Category 5 cables.
Support auto-sensing on 10/100M speed and half/ full duplex; comply
with IEEE 802.3/ 802.3u respectively.
Push continually the reset button of POE injector about 2 ~ 6 seconds
to reset the configuration parameters to factory defaults.
- 17 -
User's Manual of WNAP-6306
Top View
N-Type (N- ale)
Antenna C nnector
Bottom View
Function
M
o
Reset Button
LAN Port
Advertisement
Table of Contents
