Table of Contents
Advertisement
The page includes the following fields:
Object
LED1
LED2
LED3
LED4
5.6 LAN Setup
According to actual needs, you can choose on or off the DHCP server, and also modify the DHCP
address pool range.
5.6.1 LAN IP Address
The IP address of LAN port is used for access AP itself by computers that connect to the AP directly;
here you can set IP address you need. The IP address format is like XXX.XXX.XXX.XXX, and default
IP address is 192.168.1.1, the default subnet mask is 255.255.255.0.
Figure 5-29 Wireless LED Thresholds
The LED1 will switch on if the Signal Strength reaches the value
set in an entry field next to it. The default value is -70dBm.
The LED2 will switch on if the Signal Strength reaches the value
set in an entry field next to it. The default value is -50dBm.
The LED3 will switch on if the Signal Strength reaches the value
set in an entry field next to it. The default value is -30dBm.
The LED4 will switch on if the Signal Strength reaches the value
set in an entry field next to it. The default value is -10dBm.
- 50 -
User's Manual of WNAP-6306
Description
Advertisement
Table of Contents
