2.1.4 Switch Rear Panel
The rear panel of the Gigabit Ethernet Switch indicates an AC inlet power socket, which accepts input power from 100 to
240VAC, 50-60Hz.
Power Notice:
1. The device is a power-required device, it means, it will not work till it is powered. If your networks should active all the
time, please consider using UPS (Uninterrupted Power Supply) for your device. It will prevent you from network data
loss or network downtime.
2. In some area, installing a surge suppression device may also help to protect your Gigabit Ethernet Switch from being
damaged by unregulated surge or current to the Switch or the power adapter.
Figure 2-4 PLANET GSD-802PS LED panel
Figure 2-5 Rear Panel of GSD-802S
Figure 2-6 Rear Panel of GSD-802PS
User's Manual of GSD-802S / GSD-802PS