2.
Assign the VLAN Trunk Port to be the member of each VLAN – which wants to be aggregated. At this sample, add
Port-8 to be VLAN 2 and VLAN 3 member port.
3.
Repeat Step 1 and 2, setup the VLAN Trunk port at the partner switch.
4.
To add more VLANs to join the VLAN trunk, repeat Step 2 to assign the Trunk port to the VLANs.
Figure 4-6-17 Add VLAN Trunk Port To Each VLAN
User's Manual of GSD-802S / GSD-802PS