Poe (Power Over Ethernet) Configuration - Planet GSD-802S User Manual

4.12.2 PoE (Power over Ethernet) Configuration

This section allows the user to inspect and configure the current PoE port settings
appears.
The 802.1X Parameters table includes the following fields:
Object
• Power Reservation
• Enable
• Delivering Power
[W]
• Current [mA]
• Power Limit [W]
Figure 4-12-1 PoE (Power over Ethernet) Configuration Screen
Description
Shows how much the total power be reserved for all PDs.
There are two modes for PoE mode.
Enable: enable PoE function..
Disable: disable PoE function.
The Power Used shows how much watts the PD currently is using.
The Power Used shows how much ampere the PD currently is using.
The Maximum Power value contains a numerical value that indicates the
maximum power in watts that can be deviled to a remote device.
Per port maximum value must less than 15.4 watts, total ports values must less
than the Power Reservation value if current PoE mode is 802.3af.
User's Manual of GSD-802S / GSD-802PS
; screen in Figure 4-12-1