Intermec 2102 User Manual page 6

Positioning the Antenna
The 2102 features a built-in antenna that rotates 180° as shown below.
Follow these guidelines for positioning the antenna:
•
Place the antenna at 0° when storing the 2102.
•
Place the antenna at 90° when using the 2102 horizontally, for instance,
when the 2102 is positioned on a desk or counter.
•
Place the antenna at 180° when using the 2102 vertically, for instance,
when the 2102 is mounted on a wall or cubicle.
90
180
0
Note: Do not force the antenna past the hard stop at 0° or 180° or
you may break the antenna connector.
For information about antenna options, contact your local Intermec
representative.
10
2102G015.eps
Caution
Government regulatory agencies mandate that the antenna not
be alterable. Therefore, the access point uses a custom antenna
connector. Do not attempt to use a different antenna or you may
damage the connector and the access point.
Conseil
Les agences responsables de la réglementation gouvernementale
exigent que l'antenne ne soit pas modifiable. Par conséquent, le
point d'accès est doté d'un connecteur d'antenne personnalisé.
Ne pas essayer d'utiliser une antenne différente au risque
d'endommager le connecteur et le point d'accès.
Understanding the Connectors
You use the Power port and Serial port to configure the 2102 before you
install it. You use the Power port and Ethernet port when using the 2102 in
your network.
10BaseT
Serial
Ethernet port port
2102G001.eps
Power
port
11