2102 Specifications - Intermec 2102 User Manual

Corporate access point

Hide thumbs Also See for 2102:

Mounting & installation (14 pages)

Quick start manual (2 pages)

System manual (304 pages)

Table Of Contents

Table of Contents

Enlarged version

You can now configure the 2102 remotely using Telnet. The same

configuration menus that are available through a serial connection are

available through the Telnet session.

If you are unable to use the arrow keys on your PC keyboard to navigate

through the configuration menus, you may need to enable VT100 Arrows.

To enable VT100 Arrows

1. Choose Terminal from the Telnet toolbar.

2. Choose Preferences. The Terminal Preferences dialog box appears.

3. Select VT100 Arrows.

4. Click OK.

You can now navigate through the configuration menus using the arrow

keys on your PC keyboard.

Using a Web Browser to Access the 2102

You can use a Web browser to access the 2102 configuration menus. Note

that your session terminates if there is no activity for 15 minutes.

To access the 2102 using a Web browser

1. Open a Web browser session.

2. In the Address or Location field, enter the IP address of the 2102 and

press Enter. The Enter Network Password dialog box appears.

3. In the User Name field, enter the user name. The default is

4. In the Password field, enter the password. The default is

5. Press Enter. The Universal Access Point Configuration Web page

appears.

Several menu options appear on the Configuration Web page. You can

configure the 2102, review the changes, write the changes, upgrade the

firmware, and reboot the 2102.

Intermec