Radio Specifications; Default Settings - Intermec 2102 User Manual

Radio Specifications

This section lists the radio specifications.
2.4 GHz OpenAir Radio
Data rate 1.6 Mbps per channel
800 Kbps fallback rate for extended range
Channels Supports 15 independent, non-interfering
"virtual channels" (hopping patterns)
Range Up to 150 m (500 ft) radius indoors
Up to 300 m (1000 ft) radius outdoors
Frequency band 2.4 to 2.5 GHz (varies by country)
Radio type Frequency hopping, spread spectrum
Radio power output 100 mW (20dBm)
IEEE 802.11b High Rate Radio
Data rate 11 Mbps (High), 5.5 Mbps (Medium),
2 Mbps (Standard), 1 Mbps (Low)
with automatic fallback for increased range
Channels 11 (North America), 13 (Europe),
4 (France), 1 (Japan)
Range (11 Mbps) 160 m (525 ft) open environment
50 m (165 ft) semi-open environment
24 m (80 ft) closed environment
Frequency band 2.4 to 2.5 GHz (varies by country)
Radio type Direct sequence, spread spectrum
Radio power output 32 mW (15dBm)
22

Default Settings

This section lists the factory default settings.
Quick Start Menu Defaults
Parameter Name Range
IP Address 4 nodes, 0 to 255
IP Subnet Mask 4 nodes, 0 to 255
LAN ID 0 to 254
Access Point (AP) 0 to 16 characters
Name
Ethernet Port Configuration Menu Defaults
Parameter Name Range
Port Control Enabled/Disabled
Hello Period 1, 2, or 3 seconds
INCA Frame Type DIX/SNAP
2.4 GHz OpenAir Port Configuration Menu Defaults
Parameter Name Range
Port Control Enabled/Disabled
Hello Period 1, 2, or 3 seconds
Security ID 0 to 20 characters
Node Type Master/Station
Channel 1 to 15
Subchannel 1 to 15
Wireless Hops Enabled/Disabled
MAC Configuration Default/Manual/
Interference/
Throughput
Default
0.0.0.0
255.255.255.0
0
(UAP serial
number)
Default
Enabled
2
DIX
Default
Enabled
2
no password (null)
Master
1
1
Disabled
Default
23