Using The Seat Harness - Burley ENCORE Owner's Instruction Manual

Folding Your Burley Encore
Folding your Burley Encore is ba si cal ly the
reverse of un fold ing it. Fa mil iar ize yourself with
un fold ing the trailer as previously out lined. To
fold your trailer:
1. Remove the cover.
2. Remove the safety fl ag.
3. Remove the safety pin at the roll bar and
dis con nect the right snap hook on the back
of the child seat. Fold the roll bar against the
side panel in front of the seat. Fold the left
side panel fi rst, then the right side panel.
4. Remove the wheels and store them in a safe
area.
5. Remove the safety pin at the tongue/hitch receptacle and fold the
tongue hitch back 180˚.
We recommend reinserting the safety pins in their receptacles for
storage or transport to avoid snagging.
You can partially fold your Burley Encore as needed. Your options are to
fold only the side panels, fold only the tongue and hitch, remove the quick-
re lease wheels, or any combination of the above.
DO NOT OPERATE YOUR BURLEY ENCORE IN A PARTIALLY FOLD ED
CONDITION.
VI. Using the Seat Harness
IMPORTANT: The trail er seat is in tend ed only for chil dren old enough
to wear a hel met and sit upright by themselves. Your child must have
enough neck strength to hold his or her head up while trailering.
Junction of shoulder strap and Y-buckle must be positioned at
child's sternum to work correctly. Belts or buckles near your child's
neck can cause discomfort or serious injury. Check child periodi-
cally to make sure that he or she has not slipped from correct
seated position.
10
Burley Encore Owner's Instruction and Safety Manual