Installing Padded Seat And Shoulder Harness Pad; Using Seat Harness - Burley d’lite Owner's Instruction And Safety Manual

Using Adjustable Seat (Encore):
Loosen tension on upper seat strap.
Using Seat Recliner (d'lite, Solo and Tiger d'lite):
For added comfort when children are sleeping, make the
following adjustments to recline seat:
1. Loosen tension on lower strap on seat back.
2. Loosen tension on helmet pocket straps on seat
back (four on d'lite and Tiger d'lite, two on Solo). Photo 7
3. Tighten upper and lower seat strap and fasten buckles.
4. Reverse these steps to return seat to upright position.
IMPORTANT:
UPPER SEAT STRAP SHOULD ALWAYS BE SECURED AND TIgHTENED WHEN TRAILERINg.
Recliner seat straps (d'lite seat back shown)

Installing Padded Seat and Shoulder Harness Pad

Match, hook and loop fastening strips together
Padded Seat:
(which are sewn in on back side of seat pad and seat). Figure 8
Shoulder Harness Pad
(d'lite, Solo and Tiger d'lite):
Insert shoulder straps through web loops on
shoulder harness pad, with straps oriented so
that FLAT parts of male buckles face each
other. Figure 7
Using Seat Harness
Solo:
1. Position the child in seat center.
2. Snap shoulder straps into Y-buckle, with
buckle positioned at child's sternum. Adjust
straps so that child cannot move too far
forward in seat.
3. Fasten and adjust lap belt snugly. Figure 8
d'lite, Encore, Tiger d'lite:
One passenger:
1. Place child in seat center.
2. Snap shoulder straps into Y-buckle, with buckle positioned
at child's sternum. Adjust straps so that child cannot move
too far forward in seat.
3. Fasten and adjust lap belt snugly.
IMPORTANT:
SINgLE PASSENgER MUST BE SEATED IN CENTER POSITION.
B U R L E Y C H I L D T R A I L E R O W N E R ' S I N S T R U C T I O N A N D S A F E T Y M A N U A L
Flat face of buckles
facing each other
|