Burley ENCORE Owner's Instruction Manual page 9

Parking Brake Operation
The pre-installed parking brake on your Burley Encore is used to keep the trailer
stationary when you park your bike or when using the optional Burley Jogger Kit™
or Burley Walk 'n Roller Kit™. You can tighten or loosen the bolts attaching the
brakes to the trailer if necessary. Make sure the brake engages securely.
To disengage the
brake, move the
handle to the right.
Installing the Safety Flag
Insert the safety fl ag pole through the loop of ½" webbing on the outside of the
trailer and into the fl ag pocket at the bottom left hand corner of the trailer as shown
below. DO NOT USE YOUR TRAILER WITHOUT THE SAFETY FLAG IN PLACE.
Simply move the
handle to the left to
engage the brake.
Burley Encore Owner's Instruction and Safety Manual
9