Unfolding And Folding Your Burley Encore - Burley ENCORE Owner's Instruction Manual

V.

Unfolding and Folding Your Burley Encore

Your Burley Encore is designed with a lightweight alu mi num frame, com-
plete roll cage, and bright-colored polyester soft ware. Set ting it up or folding
it down is ac com plished in a few easy steps as follows:
Raise the Side Panels
1. With the trailer frame lying fl at, un fold the two side pan els so that they
are vertical. You will fi nd the roll bar lying against the left side panel.
2. Raise it to a hor i zon tal po si tion and pull it into the right roll bar re cep -
ta cle at the top of the right side rail.
3. Slip the safety pin through the hole in the roll bar receptacle to lock the
roll bar in place.
4. Refer to the illustration below showing locked position of the safety pin.
IMPORTANT: Connect the snap hooks on the back of the seat to the
D-rings at the rear of the side panels in the cargo area. Only release
the right snap hook when folding the trailer.
6
Burley Encore Owner's Instruction and Safety Manual