Table of Contents
Advertisement
32
Fitting the hinged door
5.
Before installation of the hinge sup-
port: Screw bottom unit of the hinge
into the holes provided in the hinge
support.
6.
Place the hinge supports evenly spaced
on the floor of the recess and align
flush with the front of the floor of the
recess. Fasten with the 6 wood screws
supplied.
7.
Using the drilling template supplied,
mark out and drill two holes a (ø35 mm,
11 mm deep) for the hinges at the bot-
tom of the hinged door. To do this,
align the drilling template with the
bottom edge of the hinged door.
Advertisement
Table of Contents
