Download  Print this page

Electrical Connection; Installing And Fitting The Hinged Door - Electrolux FAVORIT 65511 VI User Manual

Electrolux dishwasher
Hide thumbs



Electrical connection

Electrical connection
Safety standards require the appliance to be earthed.
Prior to using the appliance for the first time, ensure that the rated voltage and type of
supply on the rating plate match that of the supply where the appliance is to be installed.
The fuse rating is also to be found on the rating plate.
Always plug the mains plug into a correctly installed shockproof socket. Multi-way plugs,
connectors and extension cables must not be used.
This could constitute a fire hazard through overheating.
If necessary, have the domestic wiring system socket replaced. In case that the electrical
cable has to be replaced, contact your local Service Force centre.
The plug must be accessible after the appliance has been installed.
Never unplug the appliance by pulling on the cable. Always pull the plug.
The manufacturer accepts no liability for failure to observe the above safety precautions.

Installing and fitting the hinged door

A normal kitchen unit door with the following
dimensions can be used as a hinged door:
• Max width 596 mm
• Max height 720 mm
• Max depth 20 mm
• Weight (including handle) 3 kg to max. 8 kg
Do not exceed maximum door height, as other-
wise the door will not be able to close properly.
The hinged door must be fitted with a handle.
The hinges needed for installation and the asso-
ciated screws are standard parts (included in the
Hinged door with special handle is also available as accessorie. This must be ordered sep-
• Hinged door set in "AEG Nexxt" design:
Accessory number 153 1295 00