Silvercrest SPU 900 A1 Operating Manual page 10

ing down one of the buttons DOWN/UP
i/o changes the alarm time in quick suc-
cession.
3. Press the button PAGE/AL.SET f until the
desired alarm function (see table) is indi-
cated in the display g.
Alarm function
Acoustic signal
Radio
Switched off
4. Press the button SNOOZE/DIMMER y
to set the weekdays on which you require
the alarm function: You can choose be-
tween "workdays" (MON, TUE, WED,
THU, FRI), "weekends" (SAT, SUN) and
"every day" (MON, TUE, WED, THU,
FRI, SAT, SUN).
5. Hold the button SNOOZE/DIMMER y
pressed down for 2 seconds when you
want to be woken on a specific weekday.
To programme this weekday, repeatedly
press the SNOOZE/DIMMER button y.
Orientate yourself on the weekday indica-
tor at the top right in the display:
MON:
TUE
WED
THU
FRI
SAT
SUN
6. To return to the selection of workdays,
weekends or whole weeks, once again
hold the SNOOZE/DIMMER button y
pressed down for 2 seconds.
7. After approx. 15 seconds the display g
returns to time indication. The adjustment
for the alarm function is now saved and
will be shown.
Symbol in the
display g
no symbol
= Monday
= Tuesday
= Wednesday
= Thursday
= Friday
= Saturday
= Sunday
8. If needed, programme the other memory
positions for alarm times as detailed
above.
When the alarm signal sounds...
• ... and the alarm function "Radio" is se-
lected, the radio switches itself on with
increasing sound volume and the last
adjusted radio station for one hour.
• ... and the selected alarm function is "sig-
nal tone", the signal tone sounds with an
increasing volume for 10 minutes.
To close the individual alarm function press
any button except the SNOOZE/DIMMER
button y.
The Slumber function
When you press the SNOOZE/DIMMER but-
ton y, the presently active alarm is cancelled
for the time that is programmed for this func-
tion (see Section "Programme time for the
slumber function", 1 - 59 min., standard value
= 9 min.). Meanwhile the SNZ indicator
glows in the display g. To permanently stop
an interrupted alarm, briefly press the PAGE/
AL.SET button f.
The Reminder function
The appliance will remind you of the dates
that you have programmed in with the re-
minder function. In these cases and on these
days, from 08:00 - 23:00 and on every
full hour, the reminder alarm will sound for
10 minutes. Additionally, the SDA indicator
blinks in the display g.
Press any button to end the reminder alarm.
Adjusting changing display indicators
When the appliance is in Standby, press the
button DOWN i. In the display appears
D–
" " (for Time and Date). Press the button
DOWN i once again, "
display (for Time and World Time). Press the
button DOWN i once again, "
in the display (for Time, Date and World
Time in rotation). Press the button DOWN
i once again, "
(only Time).
- 8 -
–W
" appears in the
DW
––
" appears in the display
" appears