Cisco C22 Installation And Service Manual
  1. Manuals
  2. Brands
  3. Cisco Manuals
  4. Server
  5. UCS C22
  6. Installation and service manual

Cisco C22 Installation And Service Manual

Generation m3
Hide thumbs Also See for C22:
Table of Contents

Advertisement

Quick Links

Download this manual
Enlarged version
Cisco UCS C22 Server
Installation and Service Guide
Covers Server Generation M3
February 18, 2014
Americas Headquarters
Cisco Systems, Inc.
170 West Tasman Drive
San Jose, CA 95134-1706
USA
http://www.cisco.com
Tel: 408 526-4000
800 553-NETS (6387)
Fax: 408 527-0883
OL-26646-01
Text Part Number:

Advertisement

Table of Contents
loading

Related Manuals for Cisco C22

Summary of Contents for Cisco C22

  • Page 1 Cisco UCS C22 Server Installation and Service Guide Covers Server Generation M3 February 18, 2014 Americas Headquarters Cisco Systems, Inc. 170 West Tasman Drive San Jose, CA 95134-1706 http://www.cisco.com Tel: 408 526-4000 800 553-NETS (6387) Fax: 408 527-0883 OL-26646-01 Text Part Number:...
  • Page 2 Cisco and/or its affiliates in the United States and certain other countries. Cisco and the Cisco Logo are trademarks of Cisco Systems, Inc. and/or its affiliates in the U.S. and other countries. A listing of Cisco's trademarks can be found at www.cisco.com/go/trademarks.

  • Page 3: Table Of Contents

    Procedure 1: Reboot With recovery.cap File 2-16 Procedure 2: Use Recovery Jumper and recovery.cap File 2-18 Maintaining the Server C H A P T E R Server Monitoring and Management Tools Cisco UCS C22 Server Installation and Service Guide OL-26646-01...
  • Page 4 Installing Multiple PCIe Cards and Resolving Limited Resources 3-37 Replacing an Internal USB Flash Drive 3-39 Internal USB Flash Drive Replacement Procedure 3-39 Enabling or Disabling the Internal USB Port 3-40 Cisco UCS C22 Server Installation and Service Guide OL-26646-01...
  • Page 5 Downloading the LSI MegaSR Drivers C-10 Microsoft Windows Driver Installation C-10 Linux Driver Installation C-13 RAID Controller Cabling C-18 Cable Routing C-18 Cisco UCS C22 Server Cabling C-19 Backplane and Expander Options C-19 Cisco UCS C22 Server Installation and Service Guide OL-26646-01...
  • Page 6 Large Form Factor 4-Drive Backplane Cabling C-21 Restoring RAID Configuration After Replacing a RAID Controller C-22 For More Information C-22 Installation for Cisco UCS Integration A P P E N D I X Cisco UCS C22 Server Installation and Service Guide OL-26646-01...

  • Page 7: Related Documentation

    Preface This preface describes the audience, organization, and conventions of the Cisco UCS C22 Server Installation and Service Guide. It also provides information about how to obtain related documentation. Related Documentation The documentation set for the Cisco Unified Computing System (UCS) C-Series rack-mount servers is...

  • Page 8: Documentation Feedback

    Preface Audience This guide is for experienced network administrators who configure and maintain Cisco servers. Documentation Feedback To provide technical feedback on this document, or to report an error or omission, please send your comments to ucs-docfeedback@external.cisco.com. We appreciate your feedback.
  • Page 9 å forhindre ulykker. Bruk nummeret i slutten av hver advarsel for å finne oversettelsen i de oversatte sikkerhetsadvarslene som fulgte med denne enheten. TA VARE PÅ DISSE INSTRUKSJONENE Cisco UCS C22 Server Installation and Service Guide OL-26646-01...
  • Page 10 Använd det nummer som finns i slutet av varje varning för att hitta dess översättning i de översatta säkerhetsvarningar som medföljer denna anordning. SPARA DESSA ANVISNINGAR Cisco UCS C22 Server Installation and Service Guide OL-26646-01...
  • Page 11 Brug erklæringsnummeret efter hver advarsel for at finde oversættelsen i de oversatte advarsler, der fulgte med denne enhed. GEM DISSE ANVISNINGER Cisco UCS C22 Server Installation and Service Guide OL-26646-01...
  • Page 12 Preface Cisco UCS C22 Server Installation and Service Guide OL-26646-01...

  • Page 13: Obtaining Documentation And Submitting A Service Request

    Subscribe to What’s New in Cisco Product Documentation, which lists all new and revised Cisco technical documentation, as an RSS feed and deliver content directly to your desktop using a reader application. The RSS feeds are a free service.
  • Page 14 Preface Cisco UCS C22 Server Installation and Service Guide OL-26646-01...
  • Page 15 This chapter provides an overview of the Cisco UCS C22 server features. This server is a part of the Cisco UCS C-Series rack-mount server family. It is a high-performance, 1RU (rack-unit) server. It is designed to operate in both standalone environments and as part of the Cisco Unified Computing System (UCS).

  • Page 16: Chapter 1 Overview

    Chapter 1 Overview Figure 1-2 shows the front panel features of the large form-factor drives version of the server. Figure 1-2 Cisco UCS C22 Server (Large Form Factor Drives) Front Panel Features HDD01 HDD02 HDD03 HDD04 Power button/Power status LED 6...
  • Page 17 Pilot III BMC, running Cisco Integrated Management Controller (Cisco IMC) management firmware. Depending on your Cisco IMC settings, the Cisco IMC can be accessed through the 1-Gb Ethernet dedicated management port, the dual 1-Gb Ethernet LOM ports, or a Cisco P81E virtual interface card.
  • Page 18 The server has one internal USB 2.0 socket on the motherboard that you can use with support a USB thumb drive for additional storage. The server can be ordered with an optional blank 8-GB Cisco USB Flash Drive pre-installed in the internal USB port. Disk...

  • Page 19: Installing The Server

    NIC Modes and NIC Redundancy Settings, page 2-12 • System BIOS and Cisco IMC Firmware, page 2-13 • Updating the BIOS and Cisco IMC Firmware, page 2-13 • Service Headers and Jumpers, page 2-15 • Before you install, operate, or service a server, review the...

  • Page 20: Chapter 2 Installing The Server

    Description of damage • Effect of damage on the installation • Figure 2-1 Shipping Box Contents HDD01 HDD02 HDD03 HDD04 HDD04 HDD04 HDD05 HDD05 HDD05 HDD06 HDD07 HDD08 Server Documentation Power cord – Cisco UCS C22 Server Installation and Service Guide OL-26646-01...

  • Page 21: Preparing For Server Installation

    Avoid UPS types that use ferroresonant technology. These UPS types can become unstable with systems Caution such as the Cisco UCS, which can have substantial current draw fluctuations from fluctuating data traffic patterns. Cisco UCS C22 Server Installation and Service Guide...

  • Page 22: Rack Requirements

    The minimum vertical rack space per server must be one RU, equal to 1.75 in. (44.45 mm). • Equipment Requirements The slide rails supplied by Cisco Systems for this server do not require tools for installation. The inner rails (mounting brackets) are pre-attached to the sides of the server. Slide Rail Adjustment Range The slide rails for this server have an adjustment range of 24 to 36 inches (610 to 914 mm).

  • Page 23: Installing The Server In A Rack

    Release the clip marked “PULL” to lock the securing latch in the open position. Figure 2-2 Front Securing Latch Clip marked “PULL” on rear of assembly Spring-loaded securing latch on front of assembly Front mounting pegs Cisco UCS C22 Server Installation and Service Guide OL-26646-01...
  • Page 24 The inner rails are pre-attached to the sides of the server at the factory. You can order Note replacement inner rails if these are damaged or lost (Cisco PID UCSC-RAIL1-I). Align the inner rails that are pre-attached to the server sides with the front ends of the empty slide rails.
  • Page 25 Flange on rear of right mounting bracket Outer CMA arm attachment clip Flange on rear of outer right slide rail Continue with the “Initial Server Setup” section on page 2-8. Step 5 Cisco UCS C22 Server Installation and Service Guide OL-26646-01...

  • Page 26: Initial Server Setup

    The NIC mode is Shared LOM EXT. • Shared LOM EXT mode enables the 1-Gb Ethernet ports and the ports on any installed Cisco virtual interface card (VIC) to access the Cisco Integrated Management Interface (Cisco IMC). If you want...
  • Page 27 Cisco IMC Configuration Utility Window 1 and Window 2 (Cisco IMC 2.0(1) and Later) Set NIC mode and NIC redundancy: Step 4 Set the NIC mode to your choice for which ports to use to access the Cisco IMC for server management (see Figure 1-3 on page 1-3 for identification of the ports): Shared LOM EXT (default)—This is shared LOM extended mode.
  • Page 28 MAC addresses assigned to the Cisco IMC. The MAC address printed on the label is the beginning of the range of six contiguous MAC addresses. In Cisco IMC 2.0(1) and later, you can choose whether to use IPv4 or IPv6 IP addresses by Note checking either the IPv4 or IPv6 check box.
  • Page 29 4. The Active-active and Active-passive NIC redundancy settings require you to connect to two ports. Use a browser and the IP address of the Cisco IMC to connect to the Cisco IMC Setup Utility. The IP Step 17 address is based upon the settings that you made in...

  • Page 30: Nic Modes And Nic Redundancy Settings

    Cisco Card interfaces are both enabled. In this mode, DHCP replies are returned to both the shared LOM ports and the Cisco card ports. If the system determines that the Cisco card connection is not getting its IP address from a Cisco UCS Manager system because the server is in standalone mode, further DHCP requests from the Cisco card are disabled.

  • Page 31: System Bios And Cisco Imc Firmware

    When you upgrade the BIOS firmware, you must also upgrade the Cisco IMC firmware to the same Caution version or the server will not boot. Do not power off the server until the BIOS and Cisco IMC firmware are matching or the server will not boot.

  • Page 32: Accessing The System Bios

    Follow the instructions on the Exit menu screen to save your changes and exit the setup utility (or Press Step 6 F10). You can exit without saving changes by pressing Esc. Cisco UCS C22 Server Installation and Service Guide 2-14 OL-26646-01...

  • Page 33: Service Headers And Jumpers

    SYS FAN4 SYS FAN4 SYS FAN3 SYS FAN5 SYS FAN5 SYS FAN4 CPU 2 SYS FAN6 SYS FAN6 SYS FAN5 3 2 1 3 2 1 CN34 BIOS Recovery – Cisco UCS C22 Server Installation and Service Guide 2-15 OL-26646-01...

  • Page 34: Using The Bios Recovery Header Cn34

    As indicated by the message shown above, there are two procedures for recovering the BIOS. Try Note procedure 1 first, then if that does not recover the BIOS, use procedure 2. The server must have Cisco IMC version 1.4(6) or later to use these procedures. Note Procedure 1: Reboot With recovery.cap File Download the BIOS update package and extract it to a temporary location.
  • Page 35 Installing the Server Service Headers and Jumpers During the BIOS update, the Cisco IMC will shut down the server and the screen will be blank Note for about 10 minutes. Do not unplug the power cords during this update. The Cisco IMC will power on the server after the update is complete.

  • Page 36: Procedure 2: Use Recovery Jumper And Recovery.cap File

    Wait for server to complete the BIOS update, then remove the USB thumb drive from the server. Step 11 During the BIOS update, the Cisco IMC will shut down the server and the screen will be blank Note for about 10 minutes. Do not unplug the power cords during this update. The Cisco IMC will power on the server after the update is complete.
  • Page 37 Chapter 2 Installing the Server Service Headers and Jumpers Cisco UCS C22 Server Installation and Service Guide 2-19 OL-26646-01...
  • Page 38 Chapter 2 Installing the Server Service Headers and Jumpers Cisco UCS C22 Server Installation and Service Guide 2-20 OL-26646-01...

  • Page 39: Server Monitoring And Management Tools

    Server Monitoring and Management Tools Cisco Integrated Management Interface (Cisco IMC) You can monitor the server inventory, health, and system event logs by using the built-in Cisco Integrated Management Controller (Cisco IMC) GUI or CLI interfaces. See the user documentation for your firmware release at the following URL: http://www.cisco.com/en/US/products/ps10739/products_installation_and_configuration_guides_list.html...

  • Page 40: Chapter 3 Maintaining The Server

    Off—There is no AC power to the server. Power button/Power status LED • Amber—The server is in standby power mode. Power is supplied only to the Cisco • IMC and some motherboard functions. Green—The server is in main power mode. Power is supplied to all server •...
  • Page 41 • Off—There is no hard drive in the hard drive sled (no access, no fault). Green—The hard drive is ready. • Green, blinking—The hard drive is reading or writing data. • Cisco UCS C22 Server Installation and Service Guide OL-26646-01...

  • Page 42: Rear Panel Leds And Buttons

    Green, blinking—Traffic is present on the active link. • 10/100/1000 Ethernet dedicated Off—link speed is 10 Mbps. • management link speed Amber—link speed is 100 Mbps. • Green—link speed is 1 Gbps. • Cisco UCS C22 Server Installation and Service Guide OL-26646-01...
  • Page 43 Green—Link is active. • Green, blinking—Traffic is present on the active link. • Identification Off—The Identification LED is not in use. • Blue—The Identification LED is activated. • Cisco UCS C22 Server Installation and Service Guide OL-26646-01...

  • Page 44: Preparing For Server Component Installation

    Emergency shutdown—Press and hold the Power button for 4 seconds to force the main power off • and immediately enter standby mode. Disconnect the power cords from the power supplies in your server to completely power off the server. Step 3 Cisco UCS C22 Server Installation and Service Guide OL-26646-01...

  • Page 45: Removing And Replacing The Server Top Cover

    Removing the Top Cover or Front Chassis Panel Front panel lip Top cover Front chassis panel Top cover thumbscrew Front chassis panel securing screws (two, one on each side of the panel) Cisco UCS C22 Server Installation and Service Guide OL-26646-01...

  • Page 46: Removing And Replacing The Front Chassis Panel

    Replace the two screws that secure the panel to the chassis (see Figure 3-3). Replace the top cover to the server as described in Removing and Replacing the Server Top Cover, page 3-7. Cisco UCS C22 Server Installation and Service Guide OL-26646-01...

  • Page 47: Replaceable Component Locations

    (on motherboard under PCIe riser 1) (RAID backup unit) Serial Number Location The serial number for the server is printed on a label on the top of the server, near the front. Cisco UCS C22 Server Installation and Service Guide OL-26646-01...

  • Page 48: Color-Coded Touch Points

    Hot-swappable components have green plastic touch points. This includes the power supplies. • (Exceptions are the drive trays on the front panel, which are hot-swappable but not green). Some replaceable but non-hot-swappable components have light-blue plastic touch-points. • Cisco UCS C22 Server Installation and Service Guide 3-10 OL-26646-01...

  • Page 49: Installing Or Replacing Server Components

    Installing a Trusted Platform Module, page 3-43 • Replacing a SCU Upgrade ROM Module, page 3-46 • Replacing a Software RAID Key Module, page 3-47 • Replacing Power Supplies, page 3-48 • Cisco UCS C22 Server Installation and Service Guide 3-11 OL-26646-01...

  • Page 50: Replacing Hard Drives Or Solid State Drives

    Press the release button on the face of the drive tray. See Figure 3-7. Grasp and open the ejector lever and then pull the drive tray out of the slot. Cisco UCS C22 Server Installation and Service Guide 3-12 OL-26646-01...

  • Page 51: Replacing A Front Operations Panel Board

    Slide the server out the front of the rack far enough so that you can remove the top cover. You might have to detach cables from the rear panel to provide clearance. If you cannot safely view and access the component, remove the server from the rack. Caution Cisco UCS C22 Server Installation and Service Guide 3-13 OL-26646-01...
  • Page 52 The side of the cable end that is colored blue should face upward. Note Replace the front chassis panel. Replace the top cover. Replace the server in the rack, replace cables, and then power on the server by pressing the Power button. Cisco UCS C22 Server Installation and Service Guide 3-14 OL-26646-01...
  • Page 53 Replacing the Front Operations Panel Board SYS FAN1 CPU 1 PCIe 1 SYS FAN2 SYS FAN3 SYS FAN4 PCIe 2 CPU 2 SYS FAN5 PSU 1 1 Hinged ribbon-cable connectors (two) 2 Securing screws (two) Cisco UCS C22 Server Installation and Service Guide 3-15 OL-26646-01...

  • Page 54: Replacing A Drive Backplane

    Set the backplane in place and then slide it down within the guides on the chassis walls until it sits on the chassis floor. Replace the four screws that secure the backplane to the chassis (see Figure 3-9). Cisco UCS C22 Server Installation and Service Guide 3-16 OL-26646-01...
  • Page 55 1 Front panel control board cable connectors 3 Location of opening in backplane assembly for front operations panel ribbon cables 2 Backplane securing screw locations (two on – backplane assembly and two on exterior sides) Cisco UCS C22 Server Installation and Service Guide 3-17 OL-26646-01...

  • Page 56: Replacing Fan Modules

    The five fan modules in the server are numbered as follows when you are facing the front of the server (also see Figure 3-11). The fan numbering as designated by the server’s Cisco IMC software is also listed. For example, FAN 1 is designated as SYS_FAN2 in the software. Figure 3-10...

  • Page 57: Replacing Dimms

    DIMMs and their sockets are fragile and must be handled with care to avoid damage during installation. Caution Cisco does not support 3rd-party DIMMs. Using non-Cisco DIMMs in the server might result in system Caution problems or damage to the motherboard.

  • Page 58: Memory Performance Guidelines And Population Rules

    DIMM Population Rules, page 3-21 • Memory Mirroring, page 3-22 • DIMM Slot Numbering Figure 3-12 shows the numbering of the DIMM slots. Figure 3-12 DIMM Slots and CPUs CPU1 CPU2 Cisco UCS C22 Server Installation and Service Guide 3-20 OL-26646-01...
  • Page 59 1066 MHz in 2 DPC configurations. In Power Saving Mode (1.35 V operation), UDIMMs run at 1333 MHz in 1 DPC configurations – or at 1066 MHz in 2 DPC configurations. Cisco UCS C22 Server Installation and Service Guide 3-21 OL-26646-01...
  • Page 60 Table 3-5 Memory Mirroring DIMM Population, Two CPUs Number of DIMMs per CPU CPU 1 Population CPU2 Population A1; B1 D1; E1 A1, B1; A2, B2 D1, E1; D2, E2 Cisco UCS C22 Server Installation and Service Guide 3-22 OL-26646-01...

  • Page 61: Dimm Replacement Procedure

    Replace the air baffle and the top cover. Replace the server in the rack, replace cables, and then power on the server by pressing the Power button. Cisco UCS C22 Server Installation and Service Guide 3-23 OL-26646-01...

  • Page 62: Replacing Cpus And Heatsinks

    • Special Information For Upgrades to Intel E5-2400 v2 Series CPUs Do not upgrade your Cisco UCS C22 server to Intel E5-2400 v2 Series CPUs if you use the server Note integrated under Cisco UCS Manager control. Cisco UCS C22 servers that have Intel E5-2400 v2 Series CPUs are not supported with Cisco UCS Manager integration at this time.

  • Page 63: Single-Cpu Restrictions

    Caution between the motherboard and the CPU. Do not attempt this procedure without the required tools, which are included with each CPU option kit. If you do not have the tool, you can order a spare (Cisco PID UCS-CPU-EN-PNP). To install or replace a CPU heatsink and CPU, follow these steps:...
  • Page 64 Use the tool as shown in Figure 3-14 to grasp the protective cap and then pivot to remove the cap. Figure 3-14 Protective Cap Removal Tool Cisco UCS C22 Server Installation and Service Guide 3-26 OL-26646-01...
  • Page 65 Make sure that the tabs on the tool are fully seated in the slots on the pedestal. Press the top button on the tool to grasp and lock in the CPU. Lift the tool and CPU straight up off the pedestal. Cisco UCS C22 Server Installation and Service Guide 3-27 OL-26646-01...
  • Page 66 Apply an alcohol-based cleaning solution to the old thermal pad and let it soak for a least 15 seconds. Wipe all of the old thermal pad off the old heatsink using a soft cloth that will not scratch the heatsink surface. Cisco UCS C22 Server Installation and Service Guide 3-28 OL-26646-01...

  • Page 67: Additional Cpu-Related Parts To Order With Rma Replacement Motherboards

    Additional CPU-Related Parts To Order With RMA Replacement Motherboards When a return material authorization (RMA) of the motherboard or CPU is done on a Cisco UCS C-series server, there are additional parts that might not be included with the CPU or motherboard spare bill of materials (BOM).
  • Page 68 CPU prior to installing the heatsinks. Therefore, when ordering new heatsinks it is still necessary to order the heatsink cleaning kit at a minimum. Cisco UCS C22 Server Installation and Service Guide 3-30 OL-26646-01...

  • Page 69: Replacing The Motherboard Rtc Battery

    Push the battery into the socket until it is fully seated. Replace the top cover. Replace the server in the rack, replace cables, and power on the server by pressing the Power button. Cisco UCS C22 Server Installation and Service Guide 3-31 OL-26646-01...

  • Page 70: Replacing A Pcie Riser

    Slide the server out the front of the rack far enough so that you can remove the top cover. You might have to detach cables from the rear panel to provide clearance. If you cannot safely view and access the component, remove the server from the rack. Caution Cisco UCS C22 Server Installation and Service Guide 3-32 OL-26646-01...
  • Page 71 PCIe 1 SYS FAN2 SYS FAN3 SYS FAN4 PCIe 2 CPU 2 SYS FAN5 PSU 1 Chassis alignment points for PCIe riser 1 Chassis alignment points for PCIe riser 2 Cisco UCS C22 Server Installation and Service Guide 3-33 OL-26646-01...

  • Page 72: Replacing A Pcie Card

    Installing or Replacing Server Components Replacing a PCIe Card Cisco supports all PCIe cards qualified and sold by Cisco. PCIe cards not qualified or sold by Cisco are Caution the responsibility of the customer. Although Cisco will always stand behind and support the C-Series rack-mount servers, customers using standard, off-the-shelf, third-party cards must go to the third-party card vendor for support if any issue with that particular third-party card occurs.

  • Page 73: Replacing A Pcie Card

    Chapter 3 Maintaining the Server Installing or Replacing Server Components Replacing a PCIe Card If you are installing a Cisco UCS Virtual Interface Card, there are prerequisite considerations. See Note Special Considerations for Cisco UCS Virtual Interface Cards, page 3-36.

  • Page 74: Special Considerations For Cisco Ucs Virtual Interface Cards

    2. See note below. 3. The Cisco UCS VIC1225T is not supported for UCS integration at this time. The Cisco UCS VIC P81E is not supported in the C22 Large Form Factor version of the server. Note RAID Controller Card Cable Routing...

  • Page 75: Installing Multiple Pcie Cards And Resolving Limited Resources

    If the system BIOS does not have sufficient memory space to load any PCIe option ROM, it skips loading that option ROM, reports a system event log (SEL) event to the Cisco IMC controller and reports the following error in the Error Manager page of the BIOS Setup utility:...
  • Page 76 VICs that are not required for the system boot configuration by using the Network Adapters page in the Cisco IMC WebUI to free up some 16-bit I/O resources. Each VIC uses a minimum 16 KB of 16-bit I/O resource, so disabling PXE boot on Cisco VICs would free up some 16-bit I/O resources that can be used for other PCIe cards that are installed in the system.

  • Page 77: Replacing An Internal Usb Flash Drive

    The server has one internal USB 2.0 socket on the motherboard that you can use with a USB thumb drive for additional storage. The server can be ordered with an optional blank 8-GB Cisco USB Flash Drive pre-installed in the internal USB port.
  • Page 78 Scroll to USB Port: Internal, press Enter, and then select either Enabled or Disabled from the pop-up Step 5 menu. Press F10 to save and exit the utility. Step 6 Cisco UCS C22 Server Installation and Service Guide 3-40 OL-26646-01...

  • Page 79: Replacing The Supercap Power Module (Raid Backup Unit)

    Connect the cable from the RAID controller to the new SCPM. Replace the top cover. Replace the server in the rack, replace cables, and then power on the server by pressing the Power button. Cisco UCS C22 Server Installation and Service Guide 3-41 OL-26646-01...
  • Page 80 Installing or Replacing Server Components Figure 3-23 Replacing an SCPM SYS FAN1 CPU 1 SYS FAN2 PCIe 1 SYS FAN3 SYS FAN4 PCIe 2 CPU 2 SYS FAN5 PSU 1 SCPM bracket Cisco UCS C22 Server Installation and Service Guide 3-42 OL-26646-01...

  • Page 81: Installing A Trusted Platform Module

    On the BIOS Setup utility screen, select the Advanced tab. Select Trusted Computing to open the TPM Security Device Configuration screen. Change TPM SUPPORT to Enabled. Press F10 to save your settings and reboot the server. Cisco UCS C22 Server Installation and Service Guide 3-43 OL-26646-01...

  • Page 82: Enabling The Intel Trusted Execution Technology (Txt) Feature For The Tpm

    Likewise, Intel TXT provides for a sealed portion of storage where sensitive data such as encryption keys can be kept, helping to shield them from being compromised during an attack by malicious code. To enable the TXT feature, follow these steps: Cisco UCS C22 Server Installation and Service Guide 3-44 OL-26646-01...
  • Page 83 Verify that a TPM is now installed and enabled in the server: Step 1 Either attach a VGA monitor and USB keyboard to the server, or log in remotely to the Cisco IMC interface of the server and open a virtual KVM console window.

  • Page 84: Replacing A Scu Upgrade Rom Module

    Printed circuit board on module Motherboard header Retention feature on module Retention feature in installed position For more information about using the module and embedded RAID, see Embedded RAID Controller, page C-5. Cisco UCS C22 Server Installation and Service Guide 3-46 OL-26646-01...

  • Page 85: Replacing A Software Raid Key Module

    Printed circuit board on module Motherboard header Retention feature on motherboard header Retention feature in installed position For more information about using the module and embedded RAID, see Embedded RAID Controller, page C-5. Cisco UCS C22 Server Installation and Service Guide 3-47 OL-26646-01...

  • Page 86: Replacing Power Supplies

    Press the Power button to return the server to main power mode. Figure 3-27 Removing and Replacing Power Supplies PCIe 2 PCIe 1 PSU 1 Power supply handle Power supply release lever Cisco UCS C22 Server Installation and Service Guide 3-48 OL-26646-01...

  • Page 87: Appendix

    1.7 in. (4.32 cm) Width 16.9 in. (43.00 cm) Depth 26.0 in. (66.04 cm) Weight (fully loaded chassis) Small Form Factor: 27.78 lbs. (12.60 kg) Large Form Factor: 29.78 lbs (13.50 kg) Cisco UCS C22 Server Installation and Service Guide OL-26646-01...

  • Page 88: Power Specifications

    The power specifications for the two power supply options are listed in the following sections: 450W Power Supply, page A-2 • 650W Power Supply, page A-3 • You can get more specific power information for your exact server configuration by using the Cisco UCS Power Calculator: http://www.cisco.com/assets/cdc_content_elements/flash/dataCenter/cisco_ucs_power_calculator/ 450W Power Supply Table A-2 lists the specifications for each 450W power supply (Cisco part number UCSC-PSU-450W).

  • Page 89: Appendix A Server Specification

    Appendix A Server Specifications Environmental Specifications 650W Power Supply Table A-3 lists the specifications for each 650W power supply (Cisco part number UCSC-PSU-650W). Table A-3 Power Supply Specifications Description Specification AC input voltage range 90 to 264 VAC self-ranging Low range: 100 VAC to 120 VAC nominal...
  • Page 90 Appendix A Server Specifications Environmental Specifications Cisco UCS C22 Server Installation and Service Guide OL-26646-01...

  • Page 91: Appendix

    Power Cord, 250 VAC 10 A M 2511 Plug Europe SFS-250V-10A-ID Figure B-5 Power Cord, 250 VAC 16A EL-208 Plug South Africa, United Arab Emirates, India SFS-250V-10A-IS Figure B-6 Power Cord, 250 VAC 10 A SI32 Plug Israel Cisco UCS C22 Server Installation and Service Guide OL-26646-01...

  • Page 92: Supported Power Cords And Plugs

    Cabinet Jumper Power Cord, 250 VAC 10 A, C13-C14 Connectors CAB-C13-C14-2M Figure B-14 Cabinet Jumper Power Cord, 250 VAC 10 A, C13-C14 Connectors CAB-C13-C14-AC Figure B-15 Cabinet Jumper Power Cord, 250 VAC 10 A, C13-C14 Connectors Cisco UCS C22 Server Installation and Service Guide OL-26646-01...

  • Page 93: Ac Power Cord Illustrations

    Cordset rating: 10 A, 250 V/500V Length: 2500mm Connector: Plug: EL 701C EL 206 (IEC 60320/C15) A.S. 3112-2000) Figure B-3 SFS-250V-10A-CN Cordset rating 10A, 250V Plug: (2500 mm) EL 218 (CCEE GB2009) Connector: EL 701 (IEC60320/C13) Cisco UCS C22 Server Installation and Service Guide OL-26646-01...
  • Page 94 Figure B-5 SFS-250V-10A-ID Cordset rating 16A, 250V Plug: (2500mm) EL 208 Connector: EL 701 Figure B-6 SFS-250V-10A-IS Cordset rating 10A, 250V/500V MAX (2500 mm) Connector: EL 701B Plug: (IEC60320/C13) EL 212 (SI-32) Cisco UCS C22 Server Installation and Service Guide OL-26646-01...
  • Page 95 MP232-R Connector: IEC 60320 C15 Figure B-9 CAB-9K10A-UK Cordset rating: 10 A, 250 V/500 V MAX Length: 2500mm Connector: EL 701C Plug: EL 210 (EN 60320/C15) (BS 1363A) 13 AMP fuse Cisco UCS C22 Server Installation and Service Guide OL-26646-01...
  • Page 96 Figure B-11 CAB-N5K6A-NA Cordset rating: 10 A, 250 V Length: 8.2 ft Plug: NEMA 6-15P Connector: IEC60320/C13 Figure B-12 CAB-9K12A-NA Cordset rating 13A, 125V (8.2 feet) (2.5m) Plug: Connector: IEC60320/C15 NEMA 5-15P Cisco UCS C22 Server Installation and Service Guide OL-26646-01...
  • Page 97 CAB-C13-C14-2M, Jumper Power Cord (2 m) Cordset rating 10A, 250V (2.0 m) Connector: Plug: HS10S SS10A Figure B-15 CAB-C13-C14-AC, Jumper Power Cord (3 m) Cordset rating 10A, 250V (3.0 m) Connector: Plug: HS10S SS10A Cisco UCS C22 Server Installation and Service Guide OL-26646-01...
  • Page 98 Appendix B Power Cord Specifications Supported Power Cords and Plugs Cisco UCS C22 Server Installation and Service Guide OL-26646-01...

  • Page 99: Appendix

    RAID Controller Migration, page C-4 • Embedded RAID Controller, page C-5 • RAID Controller Cabling, page C-18 • Restoring RAID Configuration After Replacing a RAID Controller, page C-22 • For More Information, page C-22 • Cisco UCS C22 Server Installation and Service Guide OL-26646-01...

  • Page 100: A P P E N D I X C Raid Controller Considerations

    The cables in this section apply to both single- and dual-CPU configurations. Table C-1 lists the RAID options for the small form factor (SFF) version of the server. Table C-1 Cisco UCS C22 Small Form Factor RAID Options Maximum RAID Levels Controller...

  • Page 101: Mixing Drive Types In Raid Groups

    RAID Controller Considerations Mixing Drive Types in RAID Groups Table C-2 lists the RAID options for the large form factor (LFF) version of the server. Table C-2 Cisco UCS C22 Large Form Factor RAID Options Maximum RAID Levels Controller Style...

  • Page 102: Supercap Power Modules (Raid Backup Units

    Disable SCU storage support in BIOS. Install card. Install cables. HW RAID Not applicable Not allowed Onboard SCU Storage support is Disabled in BIOS Cisco UCS C22 Server Installation and Service Guide OL-26646-01...

  • Page 103: Embedded Raid Controller

    Disabling the Embedded RAID Controller in the BIOS, page C-9 • Launching the LSI Embedded RAID Configuration Utility, page C-9 • Installing LSI MegaSR Drivers For Windows and Linux, page C-9 • Cisco UCS C22 Server Installation and Service Guide OL-26646-01...

  • Page 104: Notes On Supported Embedded Megaraid Levels

    For example, you cannot configure a three-drive array into RAID 0 and RAID 5 VDs. Unlike RAID 0, 1, and 5, you cannot create multiple RAID 10 VDs from the same array. A single RAID 10 VD uses up the entire array. Cisco UCS C22 Server Installation and Service Guide OL-26646-01...

  • Page 105: Installing A Scu Upgrade Rom Module For Embedded Raid Sas Support

    The Cisco PID UCSC-RAID-ROM5= includes the SCU upgrade ROM module. Note The Cisco PID UCSC-RAID-ROM55= includes the SCU upgrade ROM module and the RAID 5 key. To install a SCU upgrade ROM module, follow these steps: Locate the header (see Figure C-1).

  • Page 106: Installing A Software Raid Key Module For Embedded Raid 5 Support

    Step 1 Select the Advanced tab, then South Bridge. Step 2 Set Onboard SATA Controller to Enabled. Step 3 Press F10 to save your changes and exit the utility. Step 4 Cisco UCS C22 Server Installation and Service Guide OL-26646-01...

  • Page 107: Disabling The Embedded Raid Controller In The Bios

    Red Hat Enterprise Linux (RHEL) • SuSE Linux Enterprise Server (SLES) • For the specific supported OS versions, see the Hardware and Software Interoperability Matrix for your server release. This section contains the following topics: Cisco UCS C22 Server Installation and Service Guide OL-26646-01...

  • Page 108: Downloading The Lsi Megasr Drivers

    See the following URL: http://www.cisco.com/cisco/software/navigator.html Click Unified Computing and Servers in the middle column. Click Cisco UCS C-Series Rack-Mount Standalone Server Software in the right-hand column. Click your model of server in the right-hand column. Click Unified Computing System (UCS) Drivers.
  • Page 109 • first Windows install disc into the drive. Skip to Step To install from remote ISO: Log in to the server’s Cisco IMC interface and continue with the next • step. Launch a Virtual KVM console window and select the Virtual Media tab.
  • Page 110 RAID Controller Considerations Embedded RAID Controller On the Driver tab, click Update Driver to open the Update Device Driver wizard, and then follow the Step 4 wizard instructions to update the driver. Cisco UCS C22 Server Installation and Service Guide C-12 OL-26646-01...

  • Page 111: Linux Driver Installation

    MegaRAID stack. Note The LSI MegaSR drivers that Cisco provides for Red Hat Linux and SUSE Linux are for the original GA versions of those distributions. The drivers do not support updates to those OS kernels. Preparing Physical Installation Diskettes For Linux This section describes how to prepare physical Linux installation diskettes from the driver image files, using either the Windows operating system or the Linux operating system.
  • Page 112 Under Red Hat Linux and SuSE Linux, you can use a driver diskette utility to create disk images from image files. Perform the following steps to create the driver update disk: Download the Cisco UCS C-Series drivers ISO, as described in Downloading the LSI MegaSR Drivers,...
  • Page 113 RHEL install disc into the drive. Then continue with Step To install from remote ISO: Log in to the server’s Cisco IMC interface. Then continue with the next • step. Launch a Virtual KVM console window and select the Virtual Media tab.
  • Page 114 Then return to Step 4 of this procedure. • To install from a virtual floppy disk: Download and save the Cisco UCS C-Series drivers ISO, as described in Downloading the LSI MegaSR Drivers, page C-10. Then continue with the next step.
  • Page 115 RHEL install disc into the drive. Skip to Step • To install from remote ISO: Log in to the server’s Cisco IMC interface and continue with the next step. Step 5 Launch a Virtual KVM console window and select the Virtual Media tab.

  • Page 116: Raid Controller Cabling

    1 Drive backplane 3 Embedded RAID SAS connectors on motherboard (Left to right: SCU_Port 0, SCU_Port 1) 2 SCPM mounting location 4 PCIe risers for RAID controller cards (bracket on chassis floor) Cisco UCS C22 Server Installation and Service Guide C-18 OL-26646-01...

  • Page 117: Cisco Ucs C22 Server Cabling

    Cisco UCS C22 (small form-factor (SFF) drives, with 8-drive backplane. • Holds up to eight 2.5-inch hard drives or solid state drives. Cisco UCS C22 (large form factor (LFF) drives, with 4-drive backplane). • Holds up to four 3.5-inch hard drives.
  • Page 118 Connect mini-SAS cable 2 from connector SAS2 on the card to the drives 5–8 connectors on the backplane. Connect the mini-SAS cable 2 SGPIO connector S2 to backplane connector B. Step 4 Cisco UCS C22 Server Installation and Service Guide C-20 OL-26646-01...

  • Page 119: Large Form Factor 4-Drive Backplane Cabling

    Connect mini-SAS cable 1 from connector SAS1 on the card to the drives 1–4 connectors on the Step 1 backplane. Connect the mini-SAS cable 1 SGPIO connector S1 to backplane connector A. Step 2 Cisco UCS C22 Server Installation and Service Guide C-21 OL-26646-01...

  • Page 120: Restoring Raid Configuration After Replacing A Raid Controller

    Full LSI documentation is also available: For basic information on RAID and how to use the LSI utilities, see the documentation at LSI.com: LSI MegaRAID SAS Software User’s Guide (for LSI MegaRAID) • Cisco UCS C22 Server Installation and Service Guide C-22 OL-26646-01...
  • Page 121 Appendix C RAID Controller Considerations For More Information http://www.cisco.com/en/US/docs/unified_computing/ucs/3rd-party/lsi/mrsas/userguide/LSI_MR_SAS_SW_UG.pdf Cisco UCS C22 Server Installation and Service Guide C-23 OL-26646-01...
  • Page 122 Appendix C RAID Controller Considerations For More Information Cisco UCS C22 Server Installation and Service Guide C-24 OL-26646-01...

  • Page 123: Appendix

    The Cisco UCS integration instructions have been moved to the integration guides found here: Cisco UCS C-Series Server Integration with UCS Manager Guides Refer to the guide that is for the version of Cisco UCS Manager that you are using. Cisco UCS C22 Server Installation and Service Guide...
  • Page 124 Appendix D Installation for Cisco UCS Integration Cisco UCS C22 Server Installation and Service Guide OL-26646-01...

Table of Contents