Power; Printer - Gateway Notebook User Manual & Code Book

Power

Your notebook is not working on AC power
■ Make sure that your AC power adapter is connected correctly to your
notebook. For more information, see
on page
■
If your notebook is plugged into a surge protector, make sure that
the surge protector is connected securely to an electrical outlet,
turned on, and working correctly. To test the outlet, plug a working
device, such as a lamp, into the outlet and turn it on.
■ Make sure that the AC power adapter cables are free from cuts or
damage. Replace any damaged cables.
Your notebook is not working on battery power
■ Allow the battery to return to room temperature.
■
Check the power management settings.
Tips & Tricks
■ Make sure that the battery is installed correctly. For more
information, see
■ Make sure that the battery is fully recharged. For more information,
see "Recharging the battery" on page
■
Make sure that the battery is calibrated correctly. For more
information, see

Printer

The printer will not turn on
■ Make sure that the printer is online. Many printers have an
online/offline button that you may need to press.
■ Make sure that the power cable is plugged into an AC power source.
21.
For more information about using power management
settings, see "Changing Power-Saving Settings" in Using
Your Computer which has been included on your hard
drive. To access this guide, click Start, All Programs,
then click Gateway Documentation.
"Installing the battery" on page
"Recalibrating the battery" on page
www.gateway.com
Troubleshooting
"Connecting the AC adapter"
20.
51.
51.
93