Gateway Notebook User Manual & Code Book page 28

Chapter 3: Getting Started
2
Connect the AC adapter to your notebook's power connector.
3
Plug the power cord into a wall outlet.
The power/battery charge indicator turns on (see
page 12
the power/battery charge indicator does not turn on, complete the
following steps until it turns on:
a
Unplug the adapter from your notebook, then plug it back in.
b
Press F
4
When you finish using your notebook for the first time, turn off your
notebook and leave your notebook connected to AC power until the
power/battery charge indicator turns blue.
Warning
Important
22
for the location of the power/battery charge indicator). If
+F1 to toggle the status lights on and off.
N
Do not attempt to disassemble the AC adapter. The
AC adapter has no user-replaceable or user-serviceable
parts inside. The AC adapter has dangerous voltages that
can cause serious injury or death. Contact Gateway about
returning defective AC adapters.
If the power/battery charge indicator does not turn blue
after three hours, contact Gateway Customer Care at
support.gateway.com.
www.gateway.com
"Right side" on