Protecting From Power Source Problems - Gateway E-100M Technical Reference Manual

2
3
4

Protecting from power source problems

During a power surge, the voltage level of electricity coming
into your notebook can increase to levels far above normal
levels and cause data loss or system damage. Protect your
notebook and peripheral devices by connecting them to a surge
protector, which absorbs voltage surges and prevents them
from reaching your notebook.
the modem connection. To protect your notebook and avoid electrical shock,
use a surge protector. If you have a telephone modem, use a surge protector
that has a modem jack. If you have a cable modem, use a surge protector that
has an antenna/cable TV jack. During an electrical storm, unplug both the surge
protector and the modem.
www.mpccorp.com
Connect the AC adapter to your notebook's power
connector.
Plug the power cord into a wall outlet. The battery charge
indicator turns on (see
of the battery charge indicator). If the battery charge
indicator does not turn on, complete the following steps
until it turns on:
a
Unplug the adapter from your notebook, then plug it
back in.
b
Press F +F1 to toggle the status lights on and off.
N
When you finish using your notebook for the first time,
turn off your notebook and leave your notebook
connected to AC power until the battery charge indicator
turns blue.
Important
If the battery charge indicator does not turn blue after three
hours, contact MPC. For more information, see
information" on page
Warning
High voltages can enter your notebook through both the power cord and
"Front" on page 4
2.
for the location
"MPC contact
15