Pin Code; Dial Mode - BT SYNERGY 4100 User Manual

PIN code

Your BT Synergy 4100 has a security PIN code which you
will need to change some of the base settings. The
default setting is 0000. You may want to change this to
prevent unauthorised changes to your settings.
1. Press or Menu
Menu
select the OK option.
Menu
2. Press or
Menu
the OK option.
3. PIN Code? is displayed. Enter the current 4 digit PIN
code and select the
4. New PIN? is displayed. Enter a new 4 digit PIN code and
select the OK option.
5. Confirm PIN? is displayed. Re-enter the new PIN code
and select the OK
beep.
6. Press and hold

Dial mode

Your BT Synergy 4100 is pre-set to Tone dialling
(Tone/Time Break). If required you can change this
setting, the dial mode options are Tone/Time Break,
Tone/Earth or Pulse/Earth.
If you experience any problems, please call the Helpline on 0870 605 8047* or email bt.helpdesk@suncorptech.com
until Base Settings is displayed then
until PIN Code is displayed then select
OK option.
option. You will hear a confirmation
to exit and return to standby.
Base settings
For security when you enter each
digit of the PIN code it will be
displayed as a .
*
35