Change Pin Code; Dial Mode - BT Freelance XD 5500 User Manual

8011 Freelance XD5500 UG [1]
44 Base settings
IMPORTANT
If you change the base PIN, make sure
you keep a record of the new number.
You can use the space provided on
page 49.
If you experience any problems, please call the Helpline on 0870 605 8047 or email bt.helpdesk@suncorptech.com
22/1/07 11:07
BT Freelance XD5500 – Issue 2 – Edition 1 – 22.01.07 – 8011

Change PIN code

Some functions are protected by a 4 digit PIN code which
must be entered if you want to change the settings. The
default PIN is 0000.
1. Press , scroll
2. Scroll
3. Enter the current 4 digit PIN code (default: 0000) and
press .
4. Enter your new 4-digit PIN and press
5. Re-enter the new PIN again and press
To cancel at any time, press and hold the

Dial mode

Your BT Freelance XD 5500 is set to Tone dialling. In the UK,
you should only need to change this if connected to an older
type of switchboard/PBX which requires Pulse dialling.
1. Press , scroll
2. Scroll
3. Press or
4. Press and hold
Page 44
to and press
SETUP
to and press
PIN CODE
to and press
SETUP
to and press
DIAL MODE
to select or
TONE PULSE
to return to the standby screen.
.
.
.
to confirm.
button.
.
.
and press .