Restore Default Settings - BT SYNERGY 4100 User Manual

36 Base settings
If you are registered to more than
one base and you try to restore the
default settings, you may need to
re-select the base you wish to use.
If you experience any problems, please call the Helpline on 0870 605 8047* or email bt.helpdesk@suncorptech.com
1. Press or Menu
Menu
select the OK option.
Menu
2. Press or
Menu
select the OK option.
Menu
3. Press or
Menu
4. Select the OK option and you will hear a confirmation
tone.
5. Press and hold

Restore default settings

You can restore your BT Synergy 4100 to its default
(original) settings. Please note this will delete your
phonebook, redial and calls list.
1. Press or Menu
Menu
select the OK option.
Menu
2. Press or
Menu
then select the OK
3. PIN Code? is displayed. Enter your 4 digit PIN code and
select the OK option. The handset power switches off
and the base beeps. The handset will then switch itself
back on and show the standby display.
until Base Settings is displayed then
until Dial Mode is displayed then
to highlight the dial mode you want.
to exit and return to standby.
until Base Settings is displayed then
until Restore Settings
option.
is displayed