Table of Contents
Advertisement
9.1 Shelf supports
Removing the shelf supports
1
Installing the shelf supports
Install the shelf supports in the opposite se-
quence.
Valid for telescopic runners:
The retaining pins on the telescopic
runners must point to the front.
9.2 Lamp
WARNING!
There is a risk of electrical shock.
The lamp and the lamp glass cover
can be hot.
Before you change the lamp:
• Deactivate the appliance.
• Remove the fuses from the fuse box or
deactivate the circuit breaker.
CAUTION!
Put a cloth on the bottom of the in-
terior of the appliance. It prevents
damage to the lamp glass cover
and the cavity.
Always use the same lamp type.
2
You can remove the shelf supports to clean
the side walls.
1.
Pull the front of the shelf support away
from the side wall.
2.
Pull the rear end of the shelf support
away from the side wall and remove it.
Replacing the lamp at the cavity
ceiling:
1.
Turn the lamp glass cover counter-
clockwise to remove it.
2.
Clean the glass cover.
3.
Replace the lamp with a suitable 300
°C heat-resistant lamp.
4.
Install the glass cover.
9.3 Oven ceiling
You can fold down the heating element on
the oven ceiling to clean the oven ceiling
easily.
WARNING!
Deactivate the appliance before
you fold down the heating element.
Make sure that the appliance is
cold. There is a risk of burns.
Folding down the heating element
1.
Remove the shelf supports.
ENGLISH
21
Advertisement
Table of Contents
