Voltage, Unpacking, Usage - B-52 Instruction And User's Manual

vOLTAgE SELECTOR
REAR PANEL
UNPACkINg YOUR WORkSTATION
Each Prodigy unit has been extensively tested and shipped in complete working order. Before unpacking
your new workstation, examine the shipping packaging for any damage that may have occurred during
transportation. If the carton appears to be damaged, thoroughly inspect your Prodigy for any external
damage. Ensure all equipment necessary to operate the workstation has arrived intact. In the unlikely event
the unit has been damaged or parts are missing, immediately contact our toll free customer support number
- 800-344-4384 - for further instructions. Do not return the Prodigy to your dealer without first contacting
our customer support center.
USINg YOUR WORkSTATION
Connect all external devices before plugging the Prodigy in to an electrical source. Set all fader and volume
controls to zero or their default positions, before turning on the Prodigy. If the Prodigy has been exposed to
any extreme temperature fluctuations (during transportation, in storage or at your venue), do not power up
the unit immediately. The resulting condensation of water might damage your unit. Power up your Prodigy
only when the unit has approximately reached room temperature.
Operation factors:
• When setting up the Prodigy, ensure the unit is not exposed to, or will not be exposed to, extreme
heat, moisture or dust.
• Do not operate the unit in excessively hot (more than 30°C/86°F) or extremely cold (less than
5°C/41°F) environments.
• Keep the unit out of direct sunlight and away from heat sources.
• Operate the Prodigy only after becoming familiar with its functions. Do not allow any other person to
operate your Prodigy who is not experienced enough to use the unit. Damage often occurs as a result
of unprofessional operation.
6
B-52 Professional Prodig y - Instruction Manual
PreCision for your PAssion
(graphic #1)
LINE VOLTAGE SELEcTION (graphic #1)
• The necessary line-in voltage may be set with the
VOLTAGE SELECTOR switch on the rear panel of
the Prodigy (using a flat head screw driver).
• Do not force the VOLTAGE SELECTOR switch as
this may cause damage
• If the VOLTAGE SELECTOR switch does not move
smoothly, contact a qualified service technician.