B-52 Instruction And User's Manual page 28

ton (7) and the music
will start playing.
The CUE button will
flash and your new
CUE point is now
memorized.
• TIP: The CUE
button and IN
button will share
the same CUE
point. The three
memory bank
points are
independent from
this CUE point.
• TIP: After
storing a CUE
point, you can
then memorize it
into one of the
three memory
banks. To do this, press the CUE button to return to
the CUE point. Then press the MEMORY button and
one of the three memory bank buttons. It will flash
indicating a new point is set. You can now memo-
rize it permanently by pressing and holding the
MEMORY for two seconds. You can now recall it the
next time you are playing the same disc (see
MEMORIZE/RECALL procedures).
• NOTE: This procedure to set a CUE point with the
JOG WHEEL will not work when SCRATCH DSP
effect is on. When you want to set a new CUE point
while scratching use on-the-fly IN button in either
the PLAY or PAUSE mode.
• TIP: The CUE button will light when a CD is in
PAUSE mode at CUE points and will flash
momentarily each time music is playing through
CUE points. The CUE button
will flash each time a new CUE
point is being memorized.
SEAMLESS LOOP:
---- You can create, play, edit and
recall a SEAMLESS LOOP on your
Prodigy CD players. The SEAM-
LESS LOOP will play music con-
tinuously without interruption.
---- To set the starting point of a
28
B-52 Professional Prodig y - Instruction Manual
PreCision for your PAssion
SEAMLESS LOOP, press the
IN button while the music
is playing. The CUE button
will flash, indicating the new
CUE point was memorized.
The IN button will light.
---- To set an end point of
the SEAMLESS LOOP, press
the OUT button. Both IN
and OUT buttons will start
flashing, indicating that the
SEAMLESS LOOP is playing.
The LOOP symbol on the LCD
display will be on, indicating
that both the start and end
point of the loop have been
set. The RELOOP symbol on
the LCD will flash, indicating
that the loop is playing.
---- To exit the SEAMLESS
LOOP press the OUT button
again. The music will con-
tinue playing without loop-
ing. Both the IN and OUT buttons,
as well as the LOOP symbol
on the LCD display will light.
This indicates that the IN and
OUT points of the SEAMLESS
LOOP are set and that you
can reactivate the same loop
at any time.
---- To start playing the same
SEAMLESS LOOP again,
press the RELOOP button.
The IN and OUT buttons as
well as the RELOOP symbol
on the LCD display will start
flashing again.
• TIP: You can change the OUT
point of the SEAMLESS LOOP.
First, press the OUT button to
exit a loop to be able to set new OUT point. Then
press OUT button again to set a new OUT point.
• TIP: You can edit the OUT loop point precisely,
while your SEAMLESS LOOP is playing. This gives
you a powerful tool for precise on-the-fly loop
editing. While the loop is playing, press and hold
the RELOOP button for 2 seconds. ALL three IN / OUT