Operations - B-52 Instruction And User's Manual

release the JOG WHEEL. This is similar to CUE
MONITORING described above in a description of a
SCRATCH CUE section.
• TIP: In SCRATCH mode you normally use the JOG
WHEEL to make a scratch. But you still can use the JOG
WHEEL for a pitch bend by using the outer rubber-cov-
ered edge of the wheel to rotate it.
REPLAcING FADERS:
Your Prodigy includes a premium quality X-fader and
channel faders. They have a great "feel" and provide
precision control over your music. Under normal opera-
tion these faders are designed for durability.
However at some point you may need to replace some
30
B-52 Professional Prodig y - Instruction Manual
PreCision for your PAssion
of your faders with new ones. We have designed the
Prodigy to make this process easy.
To replace a X-fader or channel fader you will need
to remove either the X-fader assembly plate or mixer
panel using a Phillips head screwdriver. Disconnect the
single connector attached to the old fader and connect
it to the new one. Replace the metal assembly or mixer
panel and you're ready to go!
USE ONLY ORIGINAL FADERS SUPPLIED BY B-52.
Check with your retailer or call B-52 directly to
purchase a replacement. You can also visit
www.ProdigyFX.com for additional information.
+9 +9
+6 +6
+3
+3
0 0
-3 -3
-5 -5
-7 -7
-10 -10
-15 -15
-20 -20