Specifications - B-52 Instruction And User's Manual

SPECIFICATIONS

gENERAL:
Power: AC115/230V, 60/50Hz, 46 Watts
operational temperature: 41f to 95f (+5 to +35˚C)
storage temperature: -4f to 140f (-20 to +60˚C)
operational humidity: 25% to 85% (there should be no
condensation of moisture)
Dimensions: W26.2" x D13.2" x H4.3"
664 (W) x 334 (D) x 109 (H) mm
Weight: 22.9 lbs / 10.4 kg
CD SECTION:
Laser pick-up: sony KsM-213QCs with 3 spot beam
tracking detection, 780nm wave length
D/A conversion: 1 bit
sampling rate: 44.1 kHz with 8 times over sampling
frequency response: 20 Hz to 20,000 Hz, +/-2 dB
DireCT CD output level: 2 Vrms +/-1dB
Applicable file extensions: .mp3 .MP3 .mP3 .Mp3
(63 maximum number of characters)
Maximum no. of folders: 255
Maximum number of files: 999 (with a maximum of 255 files per folder)
Disc Writing Method: Disc at once and Track at once
Multi session (if the 1st session is CDDA, you
can playback only CDDA tracks. if the 1st
session is MP3, you can playback only MP3)
MP3 format: MPeG 1 Layer 3 standard (iso/ieC 11172-3)
with sampling frequencies of 32, 44.1 and
48kHz, bit rate 32-320 Kbps. MPeG 2
Layer 3 standard (iso/ieC 13818-3) with
sampling frequencies of 16, 22.05 and 24 kHz,
bit rate 32-160 Kbps. MPeG 2.5 Layer 3
standard with sampling frequencies of 8,
11.025 and 12 kHz, bit rate 32-160 Kbps.
Pitch control range
/ Pitch bend: +/-4%, +/-8%,+/-16%,+/-100%
32
B-52 Professional Prodig y - Instruction Manual
PreCision for your PAssion
MIXER SECTION:
Master outputs
(eQs flat, faders at max):
frequency response:
output level (nominal):
s/n ratio:
THD+n:
Channel separation:
fader max attenuation:
X-fader max attenuation:
inputs sensitivity / impedance / frequency response:
MiC:
Phono:
Line:
MP3:
return (effects):
outputs' Level / impedance / frequency response:
Master balanced (XLr):
Master unbalanced (rCA):
Direct CD (with 0dBfs):
Booth:
record:
send (effects):
Headphones
(with 32 ohm load):
Eq SECTION:
MiC 1:
LoW:
MiD:
HiGH:
CHANNELS:
LoW:
MiD:
HiGH:
20 Hz to 20,000 Hz, +/-2 dB
2 Vrms on balanced XLrs
1 Vrms on unbalanced rCAs
more than 80 dB (measured with 20 kHz LPf,
A-weighted)
less than 0.05%
better than 65 dB (measured with 20 kHz LPf,
A-weighted)
more than 75 dB at 1 kHz
more than 75 dB at 1 kHz
6.3 mV (-44 dBV) / 2 kohm / 20-20,000 Hz
3.16 mV (-50 dBV) / 47 kohm / 20-20,000 Hz riAA
200 mV (-14 dBV) / 20 kohm / 20-20,000 Hz
200 mV (-14 dBV) / 20 kohm / 20-20,000 Hz
316 mV (-10 dBV) / 20 kohm / 20-20,000 Hz
2 V (6 dBV) / 600 ohm / 20-20,000 Hz
1 V (0 dBV) / 300 ohm / 20-20,000 Hz
2 V (6 dBV) / 470 ohm / 20-20,000 Hz
1 V (0 dBV) / 1 kohm / 20-20,000 Hz
316mV (-10dBV) / 1 kohm / 20-20,000 Hz
316mV (-10dBV) / 1 kohm / 20-20,000 Hz
1 V (0 dBV) / 33 ohm / 20-20,000 Hz
+/-12 dB at 70 Hz
+/-12 dB at 1 kHz
+/-12 dB at 13 kHz
+12/-30 dB at 70 Hz
+12/-30 dB at 1 kHz
+12/-30 dB at 13 kHz